Flybridge

The Main Sand Box for bertram31.com

Moderators: CaptPatrick, mike ohlstein, Bruce

Post Reply
User avatar
ScottD
Senior Member
Posts: 145
Joined: Jun 29th, '06, 17:25
Location: Palmetto,FL

Flybridge

Post by ScottD »

I have read in the past about people looking for a flybridge, Carl @ Elite Marine is now building exact bolt-on replacements for the 31. The only difference from the original is he has added the new dash set-up which can hold 10"-12" screen equipment (Raymarine C & E series, Garmin 2010 etc.). I just left his place, he's set-up and laying up the first one now, so if you need one now is the time to call him, he said he can may you a better deal since he's set-up already. Elite Marine's phone number is 727-823-5240, ask for Carl.


ScottD
Raybo Marine NY
Senior Member
Posts: 895
Joined: Jan 3rd, '07, 00:28
Location: Lindenhurst, NY
Contact:

Post by Raybo Marine NY »

does anyone have updated contact info for Elite?
User avatar
CaptPatrick
Founder/Admin
Posts: 4161
Joined: Jun 7th, '06, 14:25
Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com

Post by CaptPatrick »

Carl, actually his wife, will be registering onto the bulletin board pretty soon.

I've talked with Carl twice since yesterday and he tells me that he's down sizing his operation and ready to enter the after market/custom parts arena. He has a number high end designs for the B31. I've encouraged him to get a website developed.

Carl's phone is 727.656.8718 (The number he called me from...)
Last edited by CaptPatrick on Dec 17th, '08, 16:51, edited 1 time in total.
User avatar
ScottD
Senior Member
Posts: 145
Joined: Jun 29th, '06, 17:25
Location: Palmetto,FL

Post by ScottD »

Carl's new number is 727-656-8718, address is still the same.

Elite Marine Specialists, Inc.
101 16th Ave. South #9
St. Petersbutg, FL 33701
Raybo Marine NY
Senior Member
Posts: 895
Joined: Jan 3rd, '07, 00:28
Location: Lindenhurst, NY
Contact:

Post by Raybo Marine NY »

want to show a customer the dash kit, anyone have pictures of it or can link me to some?
User avatar
bob lico
Senior Member
Posts: 5276
Joined: Jun 29th, '06, 19:22
Location: sayville,long island

Post by bob lico »

scottD does he make that kick up on the windscreen area as a seperate piece to raise the hight of the flybridge so you can fit two c or e 120series raymarine units ??? or do you have to buy the hold flybridge.
capt.bob lico
bero13010473
jspiezio
Senior Member
Posts: 882
Joined: Nov 25th, '07, 07:21
Location: Long Island, NY

Post by jspiezio »

CaptPatrick wrote:Carl, actually his wife, will be registering onto the bulletin board pretty soon.

I've talked with Carl twice since yesterday and he tells me that he's down sizing his operation and ready to enter the after market/custom parts arena. He has a number high end designs for the B31. I've encouraged him to get a website developed.

Carl's phone is 727.656.8718 (The number he called me from...)
Best advice anyone could give him Capt P.
User avatar
ScottD
Senior Member
Posts: 145
Joined: Jun 29th, '06, 17:25
Location: Palmetto,FL

Post by ScottD »

Bob, Carl makes a dash that would replace the old dash. I think he just cuts off the old top portion of the bridge console and glasses on the new piece (I have the old original dash from SUPERMEX, I don't know why I kept it) If you pull up the posts of supermex from this site you can see it.

ScottD
tds8268
Posts: 89
Joined: Nov 15th, '06, 11:08
Location: Ocean City MD
Contact:

Post by tds8268 »

I'll be in that area on the 26th and might want to see one. Any idea on price? I can't seem to find any pics of Supermex's bridge in the history.

Dan
Raybo Marine NY
Senior Member
Posts: 895
Joined: Jan 3rd, '07, 00:28
Location: Lindenhurst, NY
Contact:

Post by Raybo Marine NY »

tds8268 wrote:I'll be in that area on the 26th and might want to see one. Any idea on price? I can't seem to find any pics of Supermex's bridge in the history.

Dan
dont feel bad, I could not find any either
User avatar
bob lico
Senior Member
Posts: 5276
Joined: Jun 29th, '06, 19:22
Location: sayville,long island

Post by bob lico »

scottD thank you for the return post. i have two c-120 raymarine and would like to mount them both in the dashboard left and right of my pod.the stock windscreen mounts on a 3" area that runs along the top of the bridge.sort of a kickup with a nice rounded contour.i know someone made a second contour and raised the front of the bridge about 6".they then proceded to remove windscreen and install two e-120 raymarine unit built into the bridge i though that was one of carl`s pieces.maybe jp had that on his boat.i think elite marine makes a one piece bridge that includes the piece i am talking about but is part of a entire bridge with glass pod and a totally differant look.
capt.bob lico
bero13010473
Raybo Marine NY
Senior Member
Posts: 895
Joined: Jan 3rd, '07, 00:28
Location: Lindenhurst, NY
Contact:

Post by Raybo Marine NY »

maybe you can shoehorn that into place with no painting also BoB!

sorry- could not resist............ how goes the windshield project anyhow?
User avatar
JP Dalik
Senior Member
Posts: 1317
Joined: Jun 30th, '06, 21:03
Location: Pt. Pleasant NJ
Contact:

Post by JP Dalik »

You mean like this Bob. These are 12"s on Chimera with room for gauges over top. The profile is stock.

Image

You can even increase the angle a little more to accomadate a sit down helm like on Pheonix
KR


JP
1977 RLDT "CHIMERA"
User avatar
CaptPatrick
Founder/Admin
Posts: 4161
Joined: Jun 7th, '06, 14:25
Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com

Post by CaptPatrick »

Similar also to what I'm doing on Hancock's B31...

Image
Raybo Marine NY
Senior Member
Posts: 895
Joined: Jan 3rd, '07, 00:28
Location: Lindenhurst, NY
Contact:

Post by Raybo Marine NY »

when I last seen Bob's boat the plan was panels similiar to those, I also suggested panels like that to my customer- but he is afraid the angle wont be friendly for use and glare?
User avatar
bob lico
Senior Member
Posts: 5276
Joined: Jun 29th, '06, 19:22
Location: sayville,long island

Post by bob lico »

thats it jp thank a million does the port and starboard of this addition have a second courtour like the original sort of a double "hump" ???
capt patrick this job you are doing is similar to jp.for me it is essential to have one c-120 raymarine (12" screen) dedicated to sonar and the other screen for gps/radar and both of you had the same idea a permanent recessed mounting for the electronics.i need that little area above for w/p switches my gauges are in the pod.i would appreciate a side view to see how you made the courtour.-----thank you both
capt.bob lico
bero13010473
User avatar
bob lico
Senior Member
Posts: 5276
Joined: Jun 29th, '06, 19:22
Location: sayville,long island

Post by bob lico »

raybo i brought phoenix in the building great to have heat,light,compressor with filters and my own key!!!

Image
capt.bob lico
bero13010473
User avatar
bob lico
Senior Member
Posts: 5276
Joined: Jun 29th, '06, 19:22
Location: sayville,long island

Post by bob lico »

i intend to do both jobs this winter ;windshield and bridge extension as we clean up the main maintenace building ,you can drive the travel right in
make a real nice work place.well low and behold there are two heavy shipping crades marked yanmar.tommy the owners says "bob put those in your boat you need them"i open the crate and they are yanmar 6ly2-stp.these are mechanical and don`t meet present epa standards they are 440 hp.capt patrick isn`t this the blocks you put in buddy boy???i think you use the 300hp base engine.how did buddy boy handle with 1411 lbs each.that is like a death wish changing the water line paint changing engines is no big issue but i wonder if i can go with 1.53 gears. i need that down angle the whole concept of phoenix is base on this one piece contruction ;harmonic balancer to prop.
capt.bob lico
bero13010473
User avatar
CaptPatrick
Founder/Admin
Posts: 4161
Joined: Jun 7th, '06, 14:25
Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com

Post by CaptPatrick »

Bob,

Stop daydreaming! You have your hands full just wrestling in that front window, and especially if you get into bridge mods... Yes, Buddy has the 6LYs, but 315 hp & 2:1 gears. The thought of 440 hp Yanmars in the B31 is ludicrous. You ready to hack into the hull & install prop pockets???

Buddy Boy topped out at 31 - 32kt with the 6LYs and zero problems with the weight.

I'll take some more photos of the bridge tomorrow.

Br,

Patrick
User avatar
bob lico
Senior Member
Posts: 5276
Joined: Jun 29th, '06, 19:22
Location: sayville,long island

Post by bob lico »

just day dreaming but i need to at least try them in another perhaps the shelter island 31fbc hidden in the woods that my son show you pictures of at montauk.getting back to the real world i would like to bring the top of the finesh bridge slightly higher than the pod like jp has.what type of material did you use to make the curve coincide with the upper bridge.
capt.bob lico
bero13010473
User avatar
ScottD
Senior Member
Posts: 145
Joined: Jun 29th, '06, 17:25
Location: Palmetto,FL

Post by ScottD »

Guess what, I can't find any pic's on line either. I guess they were under some other thread that isn't coming up. I'll be by his shop on Monday or Tuesday and will try to get so pic for everyone.

ScottD
User avatar
JP Dalik
Senior Member
Posts: 1317
Joined: Jun 30th, '06, 21:03
Location: Pt. Pleasant NJ
Contact:

Post by JP Dalik »

Bob,

The top of the bridge is original on Chimera, Capt Pats pod was pushed all the way forward and the flat panel for the electronics were tempalted out of cardboard.
The compass was mounted half on the original bridges flat edge and half on the pod. It was done this way so that the original profile of the boat stayed the same.
The flat panels were glassed to the pod and perimeter, you'll have to be careful glassing the panels in with a finished helm pod in the middle. Sort of going backwards, like glassing in a front windshield after the boats finished.

Good Luck you've got plenty of work ahead.
KR


JP
1977 RLDT "CHIMERA"
User avatar
bob lico
Senior Member
Posts: 5276
Joined: Jun 29th, '06, 19:22
Location: sayville,long island

Post by bob lico »

jp you could have fooled me from the angle of the photo (front view) i though you raised the top of bridge 6" or so.as to glassing next to the teak pod with 25 coats of finish another challange like the windshield.
capt.bob lico
bero13010473
User avatar
Bruce
Site Admin
Posts: 3785
Joined: Jun 29th, '06, 12:04
Location: Palm Beach Gardens, Fl.

Post by Bruce »

Bob,
Yes the 6LY 315 engines in Buddy Boy are the same block as the 440.

Based on my service on these engine blocks they are good up to 400hp.

The original design hp of 315 and 350 made these engines a lifetime of the boat power.

Above this not so good. Just my opinion though.

I was lucky to get the last pair of 315hp engines out of my dist for Buddy Boy. Jim didn't want the 6LP engines due to a higher pitch turbo whine.
User avatar
CaptPatrick
Founder/Admin
Posts: 4161
Joined: Jun 7th, '06, 14:25
Location: 834 Scott Dr., LLANO, TX 78643 - 325.248.0809 bertram31@bertram31.com

Post by CaptPatrick »

Bob,

Here's a few more shots from the bridge mod:

The two panel blanks were made by laminating 3/16" fibergalss sheet to 3/4" H60 Divinycell. The mating edges were ground to a taper as necessary to fit. Bonding was done with thickened epoxy. Joints will be radiused with Awlfair. The templates for the panels were cut from stiff cardboard...

All excess material, from the console pod & original dash was cut away before the panels were bedded in.

The console pod is laid up in the mold & cored with 3/4" H60 Divinycell and glassed over.

By lowering the angle or reducing dimensions of the panels, you can get more of the original coaming to show.

Br,

Patrick

Image
Image
Image
Post Reply

Who is online

Users browsing this forum: No registered users and 220 guests