bertram31.com

coolair

i have Mike Dolans Mast. I was going to use it, but probably going a different route . Donation to site and you can have it, as long as its Ok with Mike.

As it is, it does not fold down. But think it would be easly modified

coolair

high jacked for good reason. as always thanks for great info. grocos on order

coolair

ya i am defiantly going with one of those 2. The reason i asked about the buck algonquin is they are instock, plus they are alot cheaper. bout $20 each whole sale, the grocos are $80 just the tie rods, cylenders and baskets for my original strainers would be over $290 wholesale. screw that. My only ...

coolair

Will these work?
http://catalog.buckalgonquin.com/item/p ... 00rss655pf" onclick="window.open(this.href);return false;?

Or is the Groco the only way to go?

coolair

its a damn shame we are allowed to keep 2 fish, yet they can kill thousands, and for what????

coolair

Kinda looking for part number on cylender so i know what actual size to get
Thanks

coolair

While the deck is off I am down to little stuff. Exhaust, steering, fuel lines, and a little wiring. Not a lot left to get the deck on and gt her moving again. Guess I should make a list of my questions and ask them once and not create n posts. But anyway. Her are 2 more 1. What size cylinder do I u...

coolair

Thanks for info guys.very helpful as always.
I have plenty of hose, maybe dont need to go too crazy with fittingss, but i have some straight tube. I will get to work. As always Capt. Beautiful work

coolair

On exhaust is it ok to use a "T" instead of a "Y". Or is the the turn too abrupt? And if custom fittings are made do you just cut a straight piece and glass it together at needed angle?
As far as genset exhaust or raw water intake, tieing into engine exhaust or intake, bad idea??
Thanks

coolair

email i got this weekend

Uh...Guess they didn't have the Hand-Grenade Operator's Manual handy. But... my guess would be that...perhaps you're supposed to heave the Grenade a little further out...

coolair

Thank you for all the advise, and laughs. God Bless you and your family.

coolair

hydrolic jack oil comes in a bottle with one of those funnel type lids. i have always filled them by unscrewing the valve that lets it go up or down, always wondered what that black rubber plug was for :)

coolair

Pretty sure i have a bullet that will do it.

coolair

Thats funny, i was about to ask about these. I spoke to a boat yard to day about doing some work on my boat, and i mentioned i would like to run diesels, but at 70k cant justify it. he say.. well it would probably only cost 40, i just purchased several NOS cummins/mec that are 320hp. I said very int...

coolair

Sorry for you loss. You and your family will be in our prayers. My inlaws have a place very close to the elk horn, i have never noticed it, but have driven by it several times going to big sky or one of the resturants.. That is one of the most beautiful places on the planet, but as beautiful a place...

coolair

either way if i was tooling along out in the gulf and that pulled up next to me, i pay have to change my pants

coolair

I was thinking about coming next year, but i keep hearing cranston already has the best boat and always wins!!
Just kidding John
hopefully my wife and I can make it next year!! well hopefully i can make it, if she cant well we will have to just figure that out!

coolair

i 2nd Harry!

coolair

dumb question. yall are talking awlgrip. Could same be done with gelkote and get the results?

coolair

Ya i was gonna say you forgot the part of the wire wheel were it slings needles at you. a few months back i was using a 4" angle grinder with 36 gritt sanding disk, it caught my shirt, which is ruined and i now have a 3" long scare on my gut. But the SOB tool is by far the best, i have alot of those!

coolair

kinda sounded like a detroit to me. unbelieavble!

coolair

UV, take that link down or atleast add a big disclaimer, I almost got sick when i saw it.
Harry those are awesome

coolair

you guys crack me up. but that is alot of cotton from the deep deep south, harry is that yours???

coolair

I thought so, just needed to double check. I have a drill press, i will just drill them at the shop. The PSS are very nice, if i can ever get the boat running again it will be nice to have a dry bildge as you said
Thanks Harry

coolair

So sorry Mark, as you know We are all still here for you if you need anything. She is in a better place now. Our thoughts and prayers to you and your family.

coolair

I slid my shafts back to add the PSS shaft seals, do i need to replace my original solid couplings, or should i reuse them. Also the orginial set screws were drilled,i have not been able to find any, have them drilled or go with out safty wire??
thanks

coolair

much cooler at night, dont want workers to suffer from heat exhaustion

coolair

That is awesome. there are way to many cool things i know way to little about

coolair

Mark
I am just glad you some how got John out of first, i think his ego was getting a little inflated! HAhA just kidding. I wish i could have been there as i know you did. Hang in there and we are thinking and praying for you and Mara. Let me know if you need anything when you are in town.

coolair

lucky sob
gotta love cabo

coolair

I bought Xantrex/TruCharge I installed it and it never worked. After have a local authorized xantrex tech pull it open and change the blown fuse, it blew again. Xantrex refused to warranty it because it had been open and worked on though buy one of their authorized people and the cause of the proble...

coolair

Really cool pictures, didnt even realize there was a poem till it was almost over

coolair

Boy I sure wish you would do one more and I sure wish I had the money for it to be mine. Truel a work of art.

coolair

I mean i read stealth ship, but i didnt see it?? was it in that picture???

:)

coolair

"I am about to start breaking stuff"
gee i feel that way alot,

coolair

Ya but what happened to propane? I remember where my dad used to work when i was a kid they had alot of trucking running it, and it was great. But it just went away.. I have still looked at converting our trucks to propane. The problem is the cost would be over $6k and at that point you can buy a tr...

coolair

Hey scot, tell me how you know?? :) Good luck guys, be prepeared but dont buy into the hype the media creates. If it where me, i would get your hands on one of the little gensets everyone has talked about. They are easy on fuel and can keep your fridge running. I had a big 10kw durning ike, i couldn...

coolair

thanks harv
looks great!!

coolair

Man he has one good day of fishing and it goes straight to his head.
Maybe if you came and helped me work on mine you could ride in run haha

coolair

Hey
where can i pick up one of these???

coolair

Look here is the deal, IF I go, the fishing will suck, so alwas ask me i will say NO 90% of the time and you will catch fish. The weekend before Poco my buddy asked me to go, I didnt, he taged 2 nice blues. Ya a guy my bro takes fishin has a go pro he mounts on the back of the t-top and filmed a bun...

coolair

need i say more?

coolair

Actually its very usefuly in moving large amounts of cow sh*t
:)

coolair

http://www.westmarine.com/webapp/wcs/st ... sNum=10275

A budy used another one like this that was pretty cheap, i dont think it was this one though i will find out

coolair

wasnt me, but i saw a couple tearing it up in a bathroom inside a bar and the broke the crapper, funny stuff

coolair

Tom being the ice machine bad ass i am, i could probably figure it out haha Man thanks for the invite, but as busy as i am i wont be doing much fishing for a while, spet maybe on the weekends. Yes i saw that thing, I think they just bought that house and have been doing a bunch work to it. like you ...

coolair

I second RAWicklund on scotmans , the suck. At least in my profisional or not so profisional opinion, depending on who you ask of course. Funny, thats what i have right now too, and its broke Pete, your best buy is to find someone you know close who has a machine and borrow their ice...speaking of, ...

coolair

Peter I forgot one thing, I am Sure if UV could figure out how to get CX in the oil, it would clean your engine up nicely but since i dont think you can.. On older engines i have changed the oil and used a very heavy dose of marvel miracle oil, allwed them to run for a while and then changed it a ag...

coolair

i was gonna say something, but i cant figure out what to say. beautiful picture

coolair

Peter I may be wrong, but from what i am reading you just want to do the lower end of the motor, not the top end. The guys can correct me if i am wrong, but i would think it be smart to do the heads and everything else while the motor is apart. The heads and intake have to come off anyway and there ...

bertram31.com

Search found 787 matches

Re: Radar Mast

Re: sea strainers

Re: sea strainers

sea strainers

Re: Gulf of Mexico Snapper Limits/YFT Reporting Requirements

Re: Hydraulic cylinder / dripless shaft seals

Hydraulic cylinder / dripless shaft seals

Re: Fiberglass exhaust fittings

Fiberglass exhaust fittings

"FISHING" WITH A HAND-GRENADE...

Shaft couplings