bertram31.com

bertram 20

i have a 1986 28 FBC with twin merc 350s and both engines have wedge plates under carbs i recently put edelbrock carbs which i love and was looking for a spare set of wedge plates to modify because the edelbrock would not work properly with out opening up center of wedge plate i did find a pair at s...

bertram 20

i have a 86 and it has a/c and that is where mine is mounted under the forward seat just like you have done works great there

bertram 20

need to check inner engine beds against rear bulked they rot there i have a 86 and they didnt look bad till i started poking around with a screw driver also looked at a 85 28 today for someone and those also had rotted inner engine beds and fuel tank big issue if you use ethanol fuel there

bertram 20

i believe we are up to 18 boats now

bertram 20

hey have 28 with veloci jet exhaust i noticed today while cruising at 3K RPM a decent amount of water shooting out the side of my mail slot on the starb engine i never remember seeing this before is there something wrong with my muffler? I know when you rev engine it will shoot water out the side bu...

bertram 20

i know where there is a original pr of rudders the person just changed to oversize probably would sell cheap if you wanted them instead

bertram 20

i have a 1986 28 do not use the original ffiberglass fuel tank with the ethanol fuel i replaced mine with a aluminum tank ethanol will dissolve fiberglass and it will ruin your engines side tanks were not a factory item on the 28

bertram 20

i think you mean High Tide marine in florida I just installed a Buttler swim platform on my 86 28FBC i did not like the mounts they had so i had my own made for it Butlermarine.com

bertram 20

i got my replacement coolers from Mr Cool he does all sorts of coolers and good prices

bertram 20

sent some money on pay pal thank you will send more when i can

bertram 20

removed my fuel tank a few years ago whole rear deck will come out in one piece and you will have plenty of access to the tank had to cut mine out even after all tabbing on sides was cut it would not budge ended up pumping out gas and filling with water while i cut off the top and then started cutti...

bertram 20

I am sure this has been talked about but was unable to pull up anything in search, so i am going to have a cover made for front windows and was wandering how people are securing these to the boat? are you drilling snaps into aluminum window frame or putting snaps into fiberglass? any thoughts would ...

bertram 20

I have a 1986 28 FBC i replaced my tank the old tank was 240 gallon and said right on the label not to be used with Ethanol/ Alchol fuels, getting it out mine was a little difficult i totally drained it and then filled with water to get out any fuel vapor and then cut the top off and the proceeded t...

bertram 20

hello was this brushed on or sprayed on ? it looks great

bertram 20

hey mike i also just changed my bench seat on my 28 i hated it it was way to low and just not comfortable for driving the boat.I hate drilling holes and did not want to drill any holes to mount two pedastal seats so i used the existing bench seat mounts and was going to use a 1inch piece of starboar...

bertram 20

http://www.ebay.com/itm/Bertram-fishing ... 2302650214 saw this on ebay if any one is interested

bertram 20

the other day i found a pair of rudders for my 28FBC on Craigslist the picture of the rudders showed stamped on them Bertram 35 then it also said Bertram 31-2 i had the gentleman send me the dimensions of the rudders and they were my exact size and length just a bigger rudder surface.Then the next d...

bertram 20

i had a 68 bahia mar with a mercruiser 350 and we ran a 21 pitch prop and if i had a lot of extra weight i would change it to a 19p prop to get it up on plane better

bertram 20

I also sent a email with a few pics of my boats thanks

bertram 20

Share this video
http://youtu.be/tazTfjJqGf4

bertram 20

Steve - I'm sure you're all set with contacts, and certainly would like to go through this site if any benefit to the site - but if you need another option, a yard in Newburyport, MA did them for Otter (pic pages here on site) and our boat. If you need contact, pm. I am a huge believer, use them re...

bertram 20

Thoughts and prayers to Cap't Pats family and friends. Very sad news

bertram 20

I have never had the privilege of meeting you but I have gotten so much information from this site and everyone on here. I just want to thank you for your time and energy in keeping this site running. Godspeed my friend

bertram 20

think i found it looks like a model k

bertram 20

i have 86 28FBC it has a GROCO toilet i need to get a rebuild kit for it but i have looked through all of my paperwork for boat but i cant find what the model may be just wanted to know if anyone knew what model it may be it does appear to be the original unit for boat thanks

bertram 20

i would go with the mercruiser 383s 370HP carbureted and more torque than the 454 and less weight than the 454 a boat that I work on (not a Bertram)a searay he took out a big block and did a 383 and he loves it he gained fuel mileage less weight and he absolutely loves the engine and the boat perfor...

bertram 20

dug the boat looks awesome I love those big rear windows on the bulkhead it is sweet

bertram 20

hey dug ya I may be interested send me some pics and price to grumpygruner@verizon.net thanks

bertram 20

I wanted to upgrade my GPS this year I have been a Garmin GUY but wanted to get some of your opinions on different models. i am looking for a big screen unit and have also been looking at ray marine. What do you think

bertram 20

Max glad I was able to help you out i am glad she made it home in one piece and that you are getting to enjoy the boat! Good luck and keep in touch.

bertram 20

Finally got to take boat out for shakedown today and realized how awful that stock bench seat on the fly bridge is it is way to low would love to be sitting higher i just wanted to pick your brain or see some pictures of how some of you may have modified your seats. i hate drilling holes i was think...

bertram 20

Great Pic!

bertram 20

Looks Great love the Wood!!

bertram 20

Boat looks Great I love it

bertram 20

I live in Scituate if you need anything feel free to call me 774 297 0264 (mike) the Scituate boat is a pretty good place to deal with a friend of mine has used them a few times Good luck

bertram 20

I recently purchased a used trailer for my b28, triple axle Aluminum I beam trailer .I basically wanted it for storing boat in my yard and in case of a storm i could haul out myself instead of relying on my friend john and his hydraulic trailer.I will try to get some pics but it is buried under 5ft ...

bertram 20

hey this boat looks really familiar I miss my baby

bertram 20

this is for sale in mass not by me its on craigslist in mass in case any one is interested http://boston.craigslist.org/sob/bod/4806354071.html

bertram 20

sorry guys I totally missed all the respnses from the last time I brought this subject up THANKS MIKE

bertram 20

hi does anyone have any pics of there inner engine beds on 28fbc that they replaced I was looking for some other ideas rather than making that giant engine bed again maybe some kind of aluminum mount or I beam go setup thanks mike

bertram 20

ok thanks was just wandering that's all thanks again

bertram 20

Hey guys I have both engines out for winter engine beds are pretty rotted so I have started to remove them, I have starb side out I noticed an older post in regards to replacing them and capt pat said yellow pine was a good wood to use for this.I am not a carpenter by any means so I wanted to know w...

bertram 20

Hey guys I just ripped out a fiberglass Ethanol safe fuel tank in my 28fbc it was doing strange stuff to my gas like turning it brown and engines did not like that so I a had a aluminum tank made I want to coat it with something before it goes in. what about 3m Undercoating that you would get a say ...

bertram 20

I changed my risers today with a almost new set of mercruiser risers the 4inch hoses still get extremely hot on port engine, stab engine runs ok this is all going on in my driveway on the trailer I did find out that my water pressure from house is not enough to run them so I filled a 40 gallon barre...

bertram 20

did you check the exhaust hose were it connects to riser because what appeared to be on correctly on mine was not, when i looked up the exhaust hose with a flashlight i could see i was blocking water flow so i loosened them up and realigned them but it still did not help me but it may help you i eve...

bertram 20

jr wolfe i to am having a problem on my b28 my port motor exhaust hoses are hot also, over the winter replaced old cast iron risers with the mercruiser stainless risers replaced all exhaust hoses and replaced steel y pipe and elbow with fiberglass ones.I also replaced my raw water pump, I did find o...

bertram 20

found this for sale on craigslist fl Keys in case anybody interested http://sarasota.craigslist.org/boa/4502628326.html

bertram 20

saw this for sale in florida craigslist http://spacecoast.craigslist.org/boa/4449983013.html

bertram 20

so were is the pic ?you should post it

bertram 20

that is great looking boat nice job!

Search found 101 matches