bertram31.com

Todd, In my opinion, for the hull, topsides, bridge, cockpit, etc on a 60’, I’d guess $100K+. Worton Creek can give you a better ballpark estimate. I hear that Cam has had good luck there. I haven’t had any work done there but I’ve seen their work. John P. is a good, honest guy in my opinion. And I ...

I agree with Rick and Tony. In addition, here's what I've done rebuilding my blackfin 24. Get a good respirator and eye protection. A supplied air respirator is even better if your dealing with resin or paint in the bilge. Sand good w/80 grit and any brown or yellow areas need to be sanded back to g...

Micky, I'm in Frederick, MD about 3 hrs away. I'm not a diesel mechanic but can look them over and pull oil samples, other basic tasks, etc if needed.
I'll send you a text.
Hutch

John, I agree with the above. adding my 2 cents... You'll need to keep it above 40 (60-70 is better) during the entire cure cycle or it could result in a hardened but weak bond. (i.e. 70 degree epoxy isn't going to bond well to a 30 degree hull, and if the epoxy or substrate gets below 40 before ful...