Bertram31.com General Bulletin Board

Re: Cutlass install

Posted By: Tom Annulli
Date: Thursday, 8 June 2006, at 10:38 a.m.

In Response To: Re: Cutlass install (bruce)

Do what Bruce suggested - - pull the shaft and cut the old bearing out -- this will give you a chance to inspect the part of the shaft that is in the cutlass bearing -- you never know what you will find -- mine was cracked and I never would have seen it until it was too late.

Messages In This Thread

Cutlass install
Al -- Wednesday, 7 June 2006, at 8:38 p.m.

Re: Cutlass install
Capt Patrick McCrary -- Wednesday, 7 June 2006, at 8:57 p.m.

Re: Cutlass install
Scott -- Wednesday, 7 June 2006, at 9:47 p.m.

Re: Cutlass install
Al -- Wednesday, 7 June 2006, at 11:01 p.m.

Re: Cutlass install
bruce -- Thursday, 8 June 2006, at 7:27 a.m.

Re: Cutlass install
Tom Annulli -- Thursday, 8 June 2006, at 10:38 a.m.

Re: Cutlass install
Al -- Thursday, 8 June 2006, at 11:43 a.m.

Re: Cutlass install
Tommy -- Thursday, 8 June 2006, at 12:24 p.m.

Re: Cutlass install
Jerry Gomber -- Thursday, 8 June 2006, at 1:30 p.m.

Re: Cutlass install
JP -- Thursday, 8 June 2006, at 8:16 p.m.

Re: Cutlass install
Skipper Dick -- Thursday, 8 June 2006, at 3:00 p.m.

Re: Cutlass install
bruce -- Thursday, 8 June 2006, at 3:31 p.m.

Re: Cutlass install
RussP -- Thursday, 8 June 2006, at 4:27 p.m.

Re: Cutlass install
Al -- Thursday, 8 June 2006, at 6:17 p.m.