Bertram31.com General Bulletin Board

Re: Bonding question

Posted By: Vic Roy
Date: Monday, 5 June 2006, at 10:30 a.m.

In Response To: Bonding question (DanielM)

Just about any sheet metal place can shear the strips for you and most of them have copper pop rivets. I did my SSB ground system with the sheared strips & pop rivets, then sweat soldered the joints with rosin core solder. When you drill the ends of the strips for the rivets, sandwich the strips between two pcs of thin scrap wood and clamp it, otherwise the copper will twist up on the drill.

UV

Messages In This Thread

Bonding question
DanielM -- Sunday, 4 June 2006, at 8:08 p.m.

Re: Bonding question
Vic Roy -- Monday, 5 June 2006, at 10:30 a.m.

Re: Bonding question
DanielM -- Monday, 5 June 2006, at 11:56 p.m.

Re: Bonding question *LINK*
Al -- Tuesday, 6 June 2006, at 12:40 a.m.

Re: Bonding question
DanielM -- Tuesday, 6 June 2006, at 8:09 a.m.