Bertram31.com General Bulletin Board

Re: foward bilge pump

Posted By: Rawleigh
Date: Tuesday, 16 May 2006, at 11:12 a.m.

In Response To: Re: foward bilge pump (Rawleigh)

Correction: The wire is bigger than 12 gauge because of the large amperage draw. Can't remember the size right now, but it is as listed on the wiring size chart.

Messages In This Thread

foward bilge pump
Bill G -- Monday, 15 May 2006, at 9:33 a.m.

Re: foward bilge pump
Wayne -- Monday, 15 May 2006, at 10:27 a.m.

Re: foward bilge pump
Jerry Gomber -- Monday, 15 May 2006, at 10:29 a.m.

Re: foward bilge pump
Walter Kaprielian -- Monday, 15 May 2006, at 10:39 a.m.

Re: foward bilge pump
Rawleigh -- Monday, 15 May 2006, at 11:17 a.m.

Re: foward bilge pump
Tom Annulli -- Monday, 15 May 2006, at 11:24 a.m.

Re: foward bilge pump
Walter Kaprielian -- Monday, 15 May 2006, at 12:36 p.m.

Re: foward bilge pump
Rawleigh -- Monday, 15 May 2006, at 1:41 p.m.

Re: foward bilge pump
Walter Kaprielian -- Monday, 15 May 2006, at 5:33 p.m.

Re: foward bilge pump
Rawleigh -- Monday, 15 May 2006, at 7:22 p.m.

Re: foward bilge pump
Jerry Gomber -- Monday, 15 May 2006, at 11:34 a.m.

Re: foward bilge pump
Capt. Dave Kosh -- Monday, 15 May 2006, at 11:53 a.m.

Re: foward bilge pump
Rawleigh -- Monday, 15 May 2006, at 4:48 p.m.

Re: foward bilge pump
Capt. Dick Dean -- Tuesday, 16 May 2006, at 10:00 a.m.

Re: foward bilge pump
Jerry Gomber -- Tuesday, 16 May 2006, at 10:07 a.m.

Re: foward bilge pump
Rawleigh -- Tuesday, 16 May 2006, at 11:10 a.m.

Re: foward bilge pump
Rawleigh -- Tuesday, 16 May 2006, at 11:12 a.m.

Re: foward bilge pump
Jerry Gomber -- Tuesday, 16 May 2006, at 11:54 a.m.

Re: foward bilge pump
Rawleigh -- Tuesday, 16 May 2006, at 1:10 p.m.

Re: foward bilge pump
steve -- Thursday, 18 May 2006, at 12:16 a.m.