Bertram31.com General Bulletin Board

Re: Transducer Help

Posted By: Scott
Date: Wednesday, 3 May 2006, at 10:01 a.m.

In Response To: Re: Transducer Help (JohnD)

JohnD, if you have a thru hull with a faring block properly installed, you won't loose the bottom at any speed a 31 should be traveling. I have a 600W/1000W Airmar feeding a 1250 Raymarine and will hold a good reading from idle to 37 m.p.h. The only time I will loose the bottom is when in someones exhaust/wake. I did have to move the transducer further back, between the engines though. The other was forward near the sink area and did loose the bottom in rough seas. I don't notice a starboard pull from it, but I'm port heavy anyway.

Scott

Messages In This Thread

Transducer Help
Kevin -- Tuesday, 2 May 2006, at 5:52 p.m.

Re: Transducer Help
JP -- Tuesday, 2 May 2006, at 6:10 p.m.

Re: Transducer Help
Doug Crowther -- Tuesday, 2 May 2006, at 6:28 p.m.

Re: Transducer Help
Ken -- Tuesday, 2 May 2006, at 9:37 p.m.

Re: Transducer Help
JohnD -- Wednesday, 3 May 2006, at 9:25 a.m.

Re: Transducer Help
Scott -- Wednesday, 3 May 2006, at 10:01 a.m.

Re: Transducer Help
Doug Crowther -- Wednesday, 3 May 2006, at 10:36 a.m.

Re: Transducer Help
Capt. Dave Kosh -- Wednesday, 3 May 2006, at 10:16 a.m.

Re: Transducer Help
JohnD -- Wednesday, 3 May 2006, at 12:03 p.m.

Re: Transducer Help
Dug -- Wednesday, 3 May 2006, at 2:28 p.m.

Re: Transducer Help
Dug -- Wednesday, 3 May 2006, at 2:34 p.m.

Re: Transducer Help
Tom Annulli -- Thursday, 4 May 2006, at 3:43 p.m.