Bertram31.com General Bulletin Board

Re: SS Tanks

Posted By: bob fioresi
Date: Thursday, 27 April 2006, at 6:16 p.m.

In Response To: Re: SS Tanks (Russ Pagels,NC)

Russ; I have a 62 express fisherman. The tank i put in is 33 1/2 wide 77 1/2 long but i made the new tank 79" long as i had a little room back theih and 21 1/2 dep. It is 10" flat on the bottom angles 12" up for the hul bottom pitch and 18" vertical on the outsides. According to Doug at Nautic Marine, it is 245 gal. I had him put in a set up for diesel i have gas a gas guage pick up and a fitting for a generator. Cost was $1,867.00 and freight was 317.00 to long island NY. Freight to mass. is only 218.00. I gues they figure we,re rich in Ny. If you order a tank from him he'll want the measurements and a diagham so there is no guessing.Hope this helps.

Messages In This Thread

stainless vs aluminum
matt -- Wednesday, 26 April 2006, at 1:00 p.m.

Re: stainless vs aluminum
Chiles -- Wednesday, 26 April 2006, at 1:57 p.m.

SS Tanks *LINK*
zerocavity -- Wednesday, 26 April 2006, at 3:03 p.m.

Re: SS Tanks
Carl -- Wednesday, 26 April 2006, at 3:44 p.m.

Re: SS Tanks
bob fioresi -- Wednesday, 26 April 2006, at 8:47 p.m.

Re: SS Tanks
Russ Pagels,NC -- Thursday, 27 April 2006, at 9:05 a.m.

Re: SS Tanks
Mark S -- Thursday, 27 April 2006, at 9:57 a.m.

Re: SS Tanks
Chiles -- Thursday, 27 April 2006, at 10:31 a.m.

Re: SS Tanks
Mark S -- Thursday, 27 April 2006, at 11:07 a.m.

Re: SS Tanks
Capt. Dave Kosh -- Thursday, 27 April 2006, at 12:32 p.m.

Re: SS Tanks
Chiles -- Thursday, 27 April 2006, at 5:01 p.m.

Re: SS Tanks
frank price -- Friday, 28 April 2006, at 7:54 p.m.

Re: SS Tanks
Capt. Dave Kosh -- Monday, 1 May 2006, at 10:27 a.m.

Re: SS Tanks
bob fioresi -- Thursday, 27 April 2006, at 6:16 p.m.

Re: SS Tanks
Russ Pagels,NC -- Thursday, 27 April 2006, at 6:31 p.m.

Re: stainless vs aluminum
DOUG -- Thursday, 27 April 2006, at 6:37 p.m.

Re: stainless vs aluminum
Vic Roy -- Thursday, 27 April 2006, at 6:56 p.m.

Re: stainless vs aluminum
Kevin Saer -- Thursday, 27 April 2006, at 10:00 p.m.

Re: stainless vs aluminum
JohnD -- Friday, 28 April 2006, at 9:19 a.m.

Re: stainless vs aluminum *LINK*
Peter -- Sunday, 30 April 2006, at 7:45 a.m.