| |
Bertram31.com General Bulletin Board
Re: Algae-X on ebay
Posted By: Vic Roy In Response To: Re: Algae-X on ebay (Doug Crowther)
Date: Tuesday, 28 March 2006, at 9:15 p.m.
I'll look for some pix, but it's really simple. The Racors have a SAE thread and the AX have a pipe thread. You will need two pipe nipples per AX unit, one end with SAE and the other with pipe thread. I got mine at a truck parts store. Assuming you have a flexible fuel hose to the Racor, just disconnect it, take the old nipple out of the Racor, insert the new one with the male NPT, spin on the AX (use the blue pipe thread dope) then put the new SAE/NPT nipple on the outher side of the AX, put the fuel hose back on and you are done. The 1/2" nipples on the AX will support the unit without any additional brackets, etc. Just two nipples of the right thread per AX and you are done. Dirt simple, no cutting hoses, just hard plumb them in, and remember to keep the rounded end of the AX on top.
UV
| |
Bertram31.com General Bulletin Board is maintained by Patrick McCrary with WebBBS 5.12.