Bertram31.com General Bulletin Board

Re: 1 1/2" Shafts,dripless shaft seals & couplers

Posted By: JK
Date: Wednesday, 22 March 2006, at 7:07 p.m.

In Response To: Re: 1 1/2" Shafts,dripless shaft seals & couplers (Doug Crowther)

Don't grag me into getting new props too. We've got a million things going on hoping to get in the water by say June 21st or so. I never shot the engines with a phototach so I am a little concerned with going with more pitch/prop right now. We think the weight will be about the same with the redo but you never know. We were spinning 3000WOT full load and that had us a 26knts at 2600rpm. I know there is room for more...

--JK

Messages In This Thread

1 1/2" Shafts,dripless shaft seals & couplers
JimmyG -- Wednesday, 22 March 2006, at 2:54 p.m.

Re: 1 1/2" Shafts,dripless shaft seals & couplers
Doug Crowther -- Wednesday, 22 March 2006, at 3:32 p.m.

Re: 1 1/2" Shafts,dripless shaft seals & couplers
JimmyG -- Wednesday, 22 March 2006, at 3:49 p.m.

Re: 1 1/2" Shafts,dripless shaft seals & couplers
Doug Crowther -- Wednesday, 22 March 2006, at 5:07 p.m.

Re: 1 1/2" Shafts,dripless shaft seals & couplers
JimmyG -- Wednesday, 22 March 2006, at 5:51 p.m.

Re: 1 1/2" Shafts,dripless shaft seals & couplers
JK -- Wednesday, 22 March 2006, at 7:07 p.m.

Re: 1 1/2" Shafts,dripless shaft seals & couplers
Doug Crowther -- Thursday, 23 March 2006, at 2:59 p.m.

Re: 1 1/2" Shafts,dripless shaft seals & couplers
Paul Haggett -- Wednesday, 22 March 2006, at 4:19 p.m.

Re: 1 1/2" Shafts,dripless shaft seals & couplers
JimmyG -- Wednesday, 22 March 2006, at 5:52 p.m.

Re: 1 1/2" Shafts,dripless shaft seals & couplers
Ed C. -- Wednesday, 22 March 2006, at 6:58 p.m.

Re: 1 1/2" Shafts,dripless shaft seals & couplers
Ed C. -- Wednesday, 22 March 2006, at 7:07 p.m.

Re: 1 1/2" Shafts,dripless shaft seals & couplers
JimmyG -- Thursday, 23 March 2006, at 11:35 a.m.

Re: 1 1/2" Shafts,dripless shaft seals & couplers
JimmyG -- Thursday, 23 March 2006, at 11:33 a.m.

Re: 1 1/2" Shafts,dripless shaft seals & couplers
Ed C. -- Thursday, 23 March 2006, at 7:36 p.m.