Bertram31.com General Bulletin Board

Re: Tranducer Location

Posted By: Rawleigh
Date: Thursday, 16 March 2006, at 12:37 p.m.

In Response To: Re: Tranducer Location (Capt. Dave Kosh)

We had trouble with one of the inhulls on a 30' scarab that I own with a friend, and the electronics guy said forget the oil bath. He epoxied the puck transducer directly to the hull in the bilge. Said the only trick is to be careful mixing the epoxy so you dont entrain air bubbles. Works great. Fountain does it this way as well I believe. You can do this with the regular thru hulls as well, they just stick up more in the bilge. The angle of the deadrise will only affect you if you are in really deep water. I'm usually in less than 100' so it doesn't matter to me.
Rawleigh

Messages In This Thread

Tranducer Location
Al -- Tuesday, 14 March 2006, at 7:35 p.m.

Re: Tranducer Location
vic Roy -- Tuesday, 14 March 2006, at 10:11 p.m.

Re: Tranducer Location
Al -- Tuesday, 14 March 2006, at 10:25 p.m.

Re: Tranducer Location
Tommy -- Wednesday, 15 March 2006, at 8:55 a.m.

Re: Tranducer Location *LINK* *PIC*
Chiles -- Wednesday, 15 March 2006, at 9:39 a.m.

Re: Tranducer Location
Al -- Wednesday, 15 March 2006, at 10:25 a.m.

Re: Tranducer Location
Jerry Gomber -- Wednesday, 15 March 2006, at 9:05 a.m.

Re: Tranducer Location
Capt. Dave Kosh -- Wednesday, 15 March 2006, at 10:10 a.m.

Re: Tranducer Location
Craig -- Wednesday, 15 March 2006, at 3:32 p.m.

Re: Tranducer Location
Wayne -- Wednesday, 15 March 2006, at 4:02 p.m.

Re: Tranducer Location
Ken -- Wednesday, 15 March 2006, at 11:04 p.m.

Re: Tranducer Location
Capt. Dave Kosh -- Thursday, 16 March 2006, at 10:36 a.m.

Re: Tranducer Location
Rawleigh -- Thursday, 16 March 2006, at 12:37 p.m.

Re: Tranducer Location
Al -- Sunday, 26 March 2006, at 4:01 p.m.