Bertram31.com General Bulletin Board

Re: Stainless vs. Aluminum

Posted By: bruce
Date: Monday, 6 March 2006, at 8:30 p.m.

In Response To: Re: Stainless vs. Aluminum *LINK* (zerocavity)

That 844 was cheap. Remember, metal prices have substantialy increased since that tank was made.

I saw the tank Gerry got and the job was very well done. Prepared like Pat did and you make it bullet proof.

But nothing in this world is guaranteed.

Some have been fretting over this problem like a 16 year old girl waiting for the pregnacy test to register.

Don't over think the solution. Remember even if the tanks are taken out of the equation, there are still potential engine problems to develop.

Just be glad your dealing with a 31 where the tank is a breeze to change.
How would you like it if they were under the cabin floor and you had to cut the hull sides out to remove?
Been there, done that. Very expensive.
Count your blessings.

Messages In This Thread

Stainless vs. Aluminum
Harv -- Monday, 6 March 2006, at 2:42 p.m.

Re: Stainless vs. Aluminum
jp -- Monday, 6 March 2006, at 2:54 p.m.

Re: Stainless vs. Aluminum *LINK*
zerocavity -- Monday, 6 March 2006, at 3:39 p.m.

Re: Stainless vs. Aluminum
Harv -- Monday, 6 March 2006, at 3:45 p.m.

Re: Stainless vs. Aluminum
zerocavity -- Monday, 6 March 2006, at 4:06 p.m.

Re: Stainless vs. Aluminum
Dug -- Monday, 6 March 2006, at 4:20 p.m.

Re: Stainless vs. Aluminum *NM* *LINK*
zerocavity -- Monday, 6 March 2006, at 4:28 p.m.

Re: Stainless vs. Aluminum
Harv -- Monday, 6 March 2006, at 5:01 p.m.

Re: Stainless vs. Aluminum
Tony Meola -- Monday, 6 March 2006, at 9:09 p.m.

Re: Stainless vs. Aluminum
Dug -- Tuesday, 7 March 2006, at 3:10 p.m.

Re: Stainless vs. Aluminum *LINK*
Peter -- Monday, 6 March 2006, at 4:34 p.m.

Re: Stainless vs. Aluminum
Capt. Dave Kosh -- Monday, 6 March 2006, at 4:58 p.m.

Re: Stainless vs. Aluminum
Bill G -- Monday, 6 March 2006, at 5:08 p.m.

Re: Stainless vs. Aluminum *LINK*
zerocavity -- Monday, 6 March 2006, at 6:21 p.m.

Re: Stainless vs. Aluminum
bruce -- Monday, 6 March 2006, at 8:30 p.m.

Re: Stainless vs. Aluminum
Vic Roy -- Monday, 6 March 2006, at 8:58 p.m.

Re: Stainless vs. Aluminum
DavidR -- Tuesday, 7 March 2006, at 12:45 a.m.

Re: Stainless vs. Aluminum
randall -- Tuesday, 7 March 2006, at 8:59 a.m.

Re: Stainless vs. Aluminum
Rawleigh -- Tuesday, 7 March 2006, at 11:58 a.m.

Re: Stainless vs. Aluminum
Charlie Haws -- Tuesday, 7 March 2006, at 12:20 p.m.

Re: Stainless vs. Aluminum
randall -- Tuesday, 7 March 2006, at 1:00 p.m.

Re: Stainless vs. Aluminum
fred -- Tuesday, 7 March 2006, at 1:01 p.m.

Re: Stainless vs. Aluminum
Carl -- Tuesday, 7 March 2006, at 3:13 p.m.

Re: Stainless vs. Aluminum
Russ -- Tuesday, 7 March 2006, at 4:56 p.m.

Re: Stainless vs. Aluminum
Brad -- Tuesday, 7 March 2006, at 8:26 p.m.

Re: Stainless vs. Aluminum *LINK*
Brad -- Tuesday, 7 March 2006, at 8:41 p.m.

Re: Stainless vs. Aluminum
Tony Meola -- Tuesday, 7 March 2006, at 10:35 p.m.

Re: Stainless vs. Aluminum
Capt. Dave Kosh -- Wednesday, 8 March 2006, at 12:55 p.m.

Re: Stainless vs. Aluminum
Russ -- Wednesday, 8 March 2006, at 6:23 p.m.

Re: Stainless vs. Aluminum
Tony Meola -- Wednesday, 8 March 2006, at 10:07 p.m.

Re: Stainless vs. Aluminum
Harv -- Thursday, 9 March 2006, at 8:34 a.m.

Re: Stainless vs. Aluminum
Walter Kaprielian -- Thursday, 9 March 2006, at 9:59 a.m.

Re: Stainless vs. Aluminum
Tony Meola -- Thursday, 9 March 2006, at 9:39 p.m.

Re: Stainless vs. Aluminum
Harv -- Thursday, 9 March 2006, at 10:37 p.m.