Bertram31.com General Bulletin Board

Rudder flange bearing

Posted By: Dan
Date: Friday, 3 March 2006, at 7:13 a.m.

Will be pulling my stock rudders and replacing with Pats monters but I have one issue. My rudders are not the shark fin style but they do have the bearing above the tiller arm. The problem is the round stock at the bearing is 11/4" not 1" like Pats so I will need to replace the bearings. I have both Granger and McMaster-Carr catalogs that list many types of flange bearings exactly what style and material should I buy?

Thanks much!
Dan

Messages In This Thread

Rudder flange bearing
Dan -- Friday, 3 March 2006, at 7:13 a.m.

Re: Rudder flange bearing
Vic Roy -- Friday, 3 March 2006, at 8:19 a.m.

Re: Rudder flange bearing
JohnD -- Friday, 3 March 2006, at 8:57 a.m.

Re: Rudder flange bearing
Dan -- Friday, 3 March 2006, at 9:08 a.m.

Re: Rudder flange bearing *LINK*
JohnD -- Friday, 3 March 2006, at 9:29 a.m.

Re: Rudder flange bearing
Dan -- Friday, 3 March 2006, at 10:14 a.m.

Re: Rudder flange bearing
Vic Roy -- Friday, 3 March 2006, at 10:38 a.m.

Re: Rudder flange bearing *LINK*
Jim -- Friday, 3 March 2006, at 8:40 p.m.

Re: Rudder flange bearing
Harv -- Friday, 3 March 2006, at 10:57 a.m.

Re: Rudder flange bearing
Capt. Dave Kosh -- Friday, 3 March 2006, at 11:04 a.m.

Re: Rudder flange bearing
Ernest -- Friday, 3 March 2006, at 10:00 a.m.