| |
Bertram31.com General Bulletin Board
Re: Taking everyone's advice on LH STE
Posted By: Bill Fuller In Response To: Re: Taking everyone's advice on LH STE (Ernest)
Date: Tuesday, 14 February 2006, at 5:52 p.m.
Ernest
Sounds like you are almost there! Doing this type of repwer is a tremendous job. I was very fortunate to find Tony Athens to do the major parts of the job. Tony's engineering abilities and my willingness to go along with his suggestions meant that I did not have to raise the deck.
I am also running DatCon gauges, but I had no trouble finding sending units that would work just fine on the Yanmat motors. I work with San Diego SpeedoTach here in San Diego and they seem to know all engine and guge combonations. It so happens that I replaced one of the oiol pressure sending units a couple of years ago and I may still have it . If I can find it, I would be happy to send it to you to see if the threads were correct. I will also try to find the part number on my old invoices.
Just keep in mind that your are going to have a wonderful boat when you are done.
Bill
| |
Bertram31.com General Bulletin Board is maintained by Patrick McCrary with WebBBS 5.12.