Bertram31.com General Bulletin Board

Re: Teak and holly plywood

Posted By: Tom Pattillo
Date: Sunday, 12 February 2006, at 11:16 p.m.

In Response To: Re: Teak and holly plywood (John F.)

John,

I also used West, cut w/10% DN alcohol. 2 full strength coats, sanded between and w/extra attention on edges. Used 8 coats spar urethane. Make sure to wipe down good between coats; Oh, and if you are in the process of losing your hair like me, wear a hair net. Live and learn. You can only see them if you really try. I paid the same from Houston Hardwoods, good folks but it cost me $220 for 35 ft of teak trim after "set up" fees.-TOM

Messages In This Thread

Teak and holly plywood
John Davis -- Sunday, 12 February 2006, at 7:22 a.m.

Re: Teak and holly plywood
John F. -- Sunday, 12 February 2006, at 9:48 p.m.

Re: Teak and holly plywood
Tom Pattillo -- Sunday, 12 February 2006, at 11:16 p.m.

Re: Teak and holly plywood
Garry Jordan -- Monday, 13 February 2006, at 7:38 a.m.

Re: Teak and holly plywood
John F. -- Monday, 13 February 2006, at 2:03 p.m.

Re: Teak and holly plywood
John Davis -- Monday, 13 February 2006, at 3:33 p.m.

Re: Teak and holly plywood
John F. -- Tuesday, 14 February 2006, at 9:45 a.m.

Re: Teak and holly plywood
Capt. Frank -- Wednesday, 15 February 2006, at 6:41 p.m.