Bertram31.com General Bulletin Board

Re: Best material for bulkheads and cockpit subfra

Posted By: Carl
Date: Wednesday, 25 January 2006, at 3:15 p.m.

In Response To: Re: Best material for bulkheads and cockpit subfra (captdana)

I may have some on computer at home, if not I need to pull up floor again to pull my disolving fuel tank. I can snap a few shots then.

If you need sooner, I'll run down and yank deck up this weekend.

Pretty simple, I removed 1x4 wood uprights from stringers, leaving bolts,I used wood as templates and drilled same holes into fiberglass channel, 4" flatside facing stringer, tabs faceing away from stringer. Top of channel on stringer side I bolted the mahogony strips for the floor to sit on.

Messages In This Thread

Best material for bulkheads and cockpit subframe
jay jay soares -- Tuesday, 24 January 2006, at 7:14 p.m.

Re: Best material for bulkheads and cockpit subfra
Chiles -- Tuesday, 24 January 2006, at 7:44 p.m.

Re: Best material for bulkheads and cockpit subfra
JP -- Tuesday, 24 January 2006, at 7:58 p.m.

Re: Best material for bulkheads and cockpit subfra *LINK* *PIC*
Mike Dolan -- Tuesday, 24 January 2006, at 11:01 p.m.

Re: Best material for bulkheads and cockpit subfra *LINK* *PIC*
Mike Dolan -- Tuesday, 24 January 2006, at 11:06 p.m.

Re: Best material for bulkheads and cockpit subfra
Alan Ormond -- Wednesday, 25 January 2006, at 7:36 a.m.

Re: Best material for bulkheads and cockpit subfra *PIC*
Mike Dolan -- Wednesday, 25 January 2006, at 8:22 a.m.

Re: Best material for bulkheads and cockpit subfra
Carl -- Wednesday, 25 January 2006, at 12:19 p.m.

Re: Best material for bulkheads and cockpit subfra
captdana -- Wednesday, 25 January 2006, at 1:12 p.m.

Re: Best material for bulkheads and cockpit subfra
Carl -- Wednesday, 25 January 2006, at 3:15 p.m.

Re: Best material for bulkheads and cockpit subfra *PIC*
Capt. Dave Kosh -- Thursday, 26 January 2006, at 10:36 a.m.

Re: Best material for bulkheads and cockpit subfra
druck -- Thursday, 26 January 2006, at 11:14 a.m.

Re;tuna door
john shortill -- Monday, 6 February 2006, at 9:58 a.m.