Bertram31.com General Bulletin Board

Re: Best material for bulkheads and cockpit subfra

Posted By: Carl
Date: Wednesday, 25 January 2006, at 12:19 p.m.

In Response To: Re: Best material for bulkheads and cockpit subfra *PIC* (Mike Dolan)

Ditto on fiberglass from McMaster Carr, I did all upright supports for decking with 1 x 4 Fiberglass C- Channel. Bolted up nicely, and I tabbed in place. On top I wanted to place fiberglass as well but opted for Mahogony as it was faster and easier to trim and fit if required, not to mention I had on hand.

Bulkhead I did from Marine-Ply. Tryed and tested, the last piece lasted almost 40 years.

Messages In This Thread

Best material for bulkheads and cockpit subframe
jay jay soares -- Tuesday, 24 January 2006, at 7:14 p.m.

Re: Best material for bulkheads and cockpit subfra
Chiles -- Tuesday, 24 January 2006, at 7:44 p.m.

Re: Best material for bulkheads and cockpit subfra
JP -- Tuesday, 24 January 2006, at 7:58 p.m.

Re: Best material for bulkheads and cockpit subfra *LINK* *PIC*
Mike Dolan -- Tuesday, 24 January 2006, at 11:01 p.m.

Re: Best material for bulkheads and cockpit subfra *LINK* *PIC*
Mike Dolan -- Tuesday, 24 January 2006, at 11:06 p.m.

Re: Best material for bulkheads and cockpit subfra
Alan Ormond -- Wednesday, 25 January 2006, at 7:36 a.m.

Re: Best material for bulkheads and cockpit subfra *PIC*
Mike Dolan -- Wednesday, 25 January 2006, at 8:22 a.m.

Re: Best material for bulkheads and cockpit subfra
Carl -- Wednesday, 25 January 2006, at 12:19 p.m.

Re: Best material for bulkheads and cockpit subfra
captdana -- Wednesday, 25 January 2006, at 1:12 p.m.

Re: Best material for bulkheads and cockpit subfra
Carl -- Wednesday, 25 January 2006, at 3:15 p.m.

Re: Best material for bulkheads and cockpit subfra *PIC*
Capt. Dave Kosh -- Thursday, 26 January 2006, at 10:36 a.m.

Re: Best material for bulkheads and cockpit subfra
druck -- Thursday, 26 January 2006, at 11:14 a.m.

Re;tuna door
john shortill -- Monday, 6 February 2006, at 9:58 a.m.