Bertram31.com General Bulletin Board

Re: Best material for bulkheads and cockpit subfra *LINK* *PIC*

Posted By: Mike Dolan
Date: Tuesday, 24 January 2006, at 11:06 p.m.

In Response To: Re: Best material for bulkheads and cockpit subfra *LINK* *PIC* (Mike Dolan)

Heres a pic of the fiberglass anlge joints. Undoubtebly you will come up with other ways to use this stuff, but this is basically what I am writing about. They are very strong, yet easy to take apart should some ever need get under them.

mike

FIberglass Angle Joints

Messages In This Thread

Best material for bulkheads and cockpit subframe
jay jay soares -- Tuesday, 24 January 2006, at 7:14 p.m.

Re: Best material for bulkheads and cockpit subfra
Chiles -- Tuesday, 24 January 2006, at 7:44 p.m.

Re: Best material for bulkheads and cockpit subfra
JP -- Tuesday, 24 January 2006, at 7:58 p.m.

Re: Best material for bulkheads and cockpit subfra *LINK* *PIC*
Mike Dolan -- Tuesday, 24 January 2006, at 11:01 p.m.

Re: Best material for bulkheads and cockpit subfra *LINK* *PIC*
Mike Dolan -- Tuesday, 24 January 2006, at 11:06 p.m.

Re: Best material for bulkheads and cockpit subfra
Alan Ormond -- Wednesday, 25 January 2006, at 7:36 a.m.

Re: Best material for bulkheads and cockpit subfra *PIC*
Mike Dolan -- Wednesday, 25 January 2006, at 8:22 a.m.

Re: Best material for bulkheads and cockpit subfra
Carl -- Wednesday, 25 January 2006, at 12:19 p.m.

Re: Best material for bulkheads and cockpit subfra
captdana -- Wednesday, 25 January 2006, at 1:12 p.m.

Re: Best material for bulkheads and cockpit subfra
Carl -- Wednesday, 25 January 2006, at 3:15 p.m.

Re: Best material for bulkheads and cockpit subfra *PIC*
Capt. Dave Kosh -- Thursday, 26 January 2006, at 10:36 a.m.

Re: Best material for bulkheads and cockpit subfra
druck -- Thursday, 26 January 2006, at 11:14 a.m.

Re;tuna door
john shortill -- Monday, 6 February 2006, at 9:58 a.m.