Bertram31.com General Bulletin Board

Re: rigid

Posted By: JP
Date: Sunday, 22 January 2006, at 8:36 p.m.

In Response To: rigid (phil kindla)

There was a thread on this a while back. The general thought regarding bulkheads is that bulkheads shouldn't be cut net to the edge and glassed tightly . They should be roughly 1/4-3/8" short. Then tabbing should run in a radius to hold the pieces in place, the amount and size of the tabbing should be sufficient to carry the expected load of the piece.
Have a look back Capt. Pat made some in depth remarks.

KR
JP

Messages In This Thread

rigid
phil kindla -- Sunday, 22 January 2006, at 6:49 p.m.

Re: rigid
JP -- Sunday, 22 January 2006, at 8:36 p.m.