Bertram31.com General Bulletin Board

Re: Gas repower questions

Posted By: Preston Burrows
Date: Friday, 13 January 2006, at 1:09 p.m.

In Response To: Re: Gas repower questions (Harv)

Kevin:

Crusaders have hi-rise intake manifolds and would be a very tight fit under your B28's hatches - I looked into them last year and reckoned I'd have,at best,1/2" clearance overhead with their carburetted 350cid small blocks.

You would also need to order the low profile exhaust elbows,as Crusaders regular exhaust elbows would likely cause clearance issues,particularly on the inboard sides of both engine compartment hatches.

E-mail me off board,if you like,for more info.

1398

ps:The answer to what constitutes a good deal is one you can walk away from!

Messages In This Thread

Gas repower questions
Kevin Mehegan -- Tuesday, 10 January 2006, at 12:35 p.m.

Re: Gas repower questions
Preston Burrows -- Tuesday, 10 January 2006, at 12:59 p.m.

Re: Gas repower questions
Doug LeBlanc -- Tuesday, 10 January 2006, at 2:47 p.m.

Re: Gas repower questions
Kevin Mehegan -- Wednesday, 11 January 2006, at 6:07 p.m.

Re: Gas repower questions
Jon Wagner -- Wednesday, 11 January 2006, at 7:29 p.m.

Re: Gas repower questions
Harv -- Wednesday, 11 January 2006, at 10:18 p.m.

Re: Gas repower questions
Jon Wagner -- Thursday, 12 January 2006, at 7:12 a.m.

Re: Gas repower questions
cwj -- Thursday, 12 January 2006, at 8:35 a.m.

Re: Gas repower questions
Kevin Mehegan -- Thursday, 12 January 2006, at 3:01 p.m.

Re: Gas repower questions
Harv -- Thursday, 12 January 2006, at 8:09 p.m.

Re: Gas repower questions
Preston Burrows -- Friday, 13 January 2006, at 1:09 p.m.

Re: Gas repower questions
bob lico -- Sunday, 15 January 2006, at 5:02 p.m.