Bertram31.com General Bulletin Board

Re: Fuel Tank Installation

Posted By: Mike Dolan
Date: Sunday, 8 January 2006, at 11:19 p.m.

In Response To: Re: Fuel Tank Installation (Capt. Mitch)

Thanks Mitch,

I'm taking this winter off, as far as big projects, I spent way to much quality time with the grinder in a tyvek suit last winter. Sure is nice to have everything right down there. The engine compartments will be my next big project... maybe next winter.

I made the tillers arms myself. They are 316 stainless and have been in there for several seasons. In hind site they probably didn't need to be so heavy, but they do the job.

My bilge project ended at the bulkhead, and because my power was not changing during the project I just kept the exhuast the way it was, but I left as much clearance as possible in the bulkhead incase I choose to someting different should I re-power with gas or diesel.

Mike

Messages In This Thread

Fuel Tank Installation
cross -- Friday, 6 January 2006, at 9:58 p.m.

Re: Fuel Tank Installation
Jim -- Saturday, 7 January 2006, at 11:10 p.m.

Re: Fuel Tank Installation
cross -- Sunday, 8 January 2006, at 12:18 p.m.

Re: Fuel Tank Installation *LINK*
Mike Dolan -- Sunday, 8 January 2006, at 12:55 p.m.

Re: Fuel Tank Installation *LINK*
Mike Dolan -- Sunday, 8 January 2006, at 12:59 p.m.

Re: Fuel Tank Installation *NM* *LINK*
Mike Dolan -- Sunday, 8 January 2006, at 1:02 p.m.

Re: Fuel Tank Installation
Capt. Mitch -- Sunday, 8 January 2006, at 5:24 p.m.

Re: Fuel Tank Installation
Mike Dolan -- Sunday, 8 January 2006, at 11:19 p.m.

Re: Fuel Tank Installation
cross -- Sunday, 8 January 2006, at 6:56 p.m.

Re: Fuel Tank Installation
Mike Dolan -- Sunday, 8 January 2006, at 11:40 p.m.

Re: Fuel Tank Installation
Capt. Dave Kosh -- Monday, 9 January 2006, at 10:26 a.m.