Bertram31.com General Bulletin Board

Re: Hydraulic Steering Head Rebuild Link

Posted By: Capt. Dave Kosh
Date: Thursday, 5 January 2006, at 11:00 a.m.

In Response To: Re: Hydraulic Steering Head Rebuild Link *PIC* (Chiles)

What Chiles says is true but add I used a wheel puller to remove the steering wheel from the shaft.Make sure you have mineral spirits, greased lightning etc. for cleanup and if you spill some be careful as a fall is not a good thing. Mine went out yesterday. Today I shipped my free fall windlass off for repair. I plan on using Tefgel for the steering wheel shaft for installation. My threaded stud for the steering wheel is slightly bent so see what the man says.I'll probably have to get a new shaft. Dave K

Messages In This Thread

Hydraulic Steering Head Rebuild Link
Capt. Dave Kosh -- Tuesday, 3 January 2006, at 11:16 a.m.

Re: Hydraulic Steering Head Rebuild Link
Capt. Dave Kosh -- Tuesday, 3 January 2006, at 12:26 p.m.

Re: Hydraulic Steering Head Rebuild Link
Chiles -- Tuesday, 3 January 2006, at 12:57 p.m.

Re: Hydraulic Steering Head Rebuild Link
Walter Kaprielian -- Tuesday, 3 January 2006, at 2:40 p.m.

Re: Hydraulic Steering Head Rebuild Link
Capt. Dave Kosh -- Tuesday, 3 January 2006, at 3:42 p.m.

Re: Hydraulic Steering Head Rebuild Link
b zelinski -- Tuesday, 3 January 2006, at 5:02 p.m.

Re: Hydraulic Steering Head Rebuild Link *PIC*
Chiles -- Tuesday, 3 January 2006, at 6:38 p.m.

Re: Hydraulic Steering Head Rebuild Link
Rumrunner -- Tuesday, 3 January 2006, at 10:54 p.m.

Re: Hydraulic Steering Head Rebuild Link
Capt. Dave Kosh -- Thursday, 5 January 2006, at 11:00 a.m.

Link to Charman *LINK*
Jim -- Tuesday, 3 January 2006, at 9:44 p.m.

Re: Hydraulic Steering Head Rebuild Link
steve -- Wednesday, 4 January 2006, at 4:18 p.m.