Bertram31.com General Bulletin Board

Re: Prop puller

Posted By: Tony Meola
Date: Thursday, 15 December 2005, at 8:50 p.m.

In Response To: Re: Prop puller (Harv)

The reason the prop shops and others say to put the prop on dry is so that the prop is properly bonded in order to prevent electrolisis. If they are so tight that they don't want to come off, then just take a propane torch and heat the hub on the key way side. Don't make it glow just get it hot and with the pressure from the prop puller it should come off. Tony Meola

Messages In This Thread

Prop puller
Classic Trade -- Thursday, 15 December 2005, at 9:20 a.m.

Re: Prop puller *LINK*
Rawleigh -- Thursday, 15 December 2005, at 10:04 a.m.

Re: Prop puller
Capt. Dick Dean -- Thursday, 15 December 2005, at 10:53 a.m.

Re: Prop puller
Harv -- Thursday, 15 December 2005, at 11:52 a.m.

Re: Prop puller
Tony Meola -- Thursday, 15 December 2005, at 8:50 p.m.

Re: Prop puller
Mike Dolan -- Thursday, 15 December 2005, at 1:43 p.m.

Re: Prop puller
Scott -- Thursday, 15 December 2005, at 12:35 p.m.

Re: Prop puller
Ed C. -- Thursday, 15 December 2005, at 3:07 p.m.

Re: Prop puller
cwj -- Thursday, 15 December 2005, at 3:34 p.m.

Re: Prop puller
craig mac -- Thursday, 15 December 2005, at 4:08 p.m.

Re: Prop puller
Vic Roy -- Thursday, 15 December 2005, at 5:37 p.m.

Re: Prop puller
Scott -- Thursday, 15 December 2005, at 7:28 p.m.

Re: Prop puller
Vic Roy -- Thursday, 15 December 2005, at 8:35 p.m.

Re: Prop puller
Rawleigh -- Thursday, 15 December 2005, at 10:52 p.m.

Re: Prop puller
Classic Trade -- Friday, 16 December 2005, at 9:17 a.m.

Re: Prop puller
John F. -- Friday, 16 December 2005, at 10:27 a.m.

Re: Prop puller
Classic Trade -- Friday, 16 December 2005, at 11:53 a.m.

Re: Prop puller
John F. -- Friday, 16 December 2005, at 12:03 p.m.

Re: Prop puller
sean -- Monday, 19 December 2005, at 2:26 p.m.