Bertram31.com General Bulletin Board

Re: Prop puller

Posted By: Capt. Dick Dean
Date: Thursday, 15 December 2005, at 10:53 a.m.

In Response To: Re: Prop puller *LINK* (Rawleigh)

I just took both off. Used a prop knock-off nut with a four pound hammer. The nut cost US$29.00, can't remember what the hammer cost. And I sprayed with Corrosion-X the day before! I've pulled the props four times using the "hammer" with no damage to the shaft or tranny. My battle is with the sand bars.

Messages In This Thread

Prop puller
Classic Trade -- Thursday, 15 December 2005, at 9:20 a.m.

Re: Prop puller *LINK*
Rawleigh -- Thursday, 15 December 2005, at 10:04 a.m.

Re: Prop puller
Capt. Dick Dean -- Thursday, 15 December 2005, at 10:53 a.m.

Re: Prop puller
Harv -- Thursday, 15 December 2005, at 11:52 a.m.

Re: Prop puller
Tony Meola -- Thursday, 15 December 2005, at 8:50 p.m.

Re: Prop puller
Mike Dolan -- Thursday, 15 December 2005, at 1:43 p.m.

Re: Prop puller
Scott -- Thursday, 15 December 2005, at 12:35 p.m.

Re: Prop puller
Ed C. -- Thursday, 15 December 2005, at 3:07 p.m.

Re: Prop puller
cwj -- Thursday, 15 December 2005, at 3:34 p.m.

Re: Prop puller
craig mac -- Thursday, 15 December 2005, at 4:08 p.m.

Re: Prop puller
Vic Roy -- Thursday, 15 December 2005, at 5:37 p.m.

Re: Prop puller
Scott -- Thursday, 15 December 2005, at 7:28 p.m.

Re: Prop puller
Vic Roy -- Thursday, 15 December 2005, at 8:35 p.m.

Re: Prop puller
Rawleigh -- Thursday, 15 December 2005, at 10:52 p.m.

Re: Prop puller
Classic Trade -- Friday, 16 December 2005, at 9:17 a.m.

Re: Prop puller
John F. -- Friday, 16 December 2005, at 10:27 a.m.

Re: Prop puller
Classic Trade -- Friday, 16 December 2005, at 11:53 a.m.

Re: Prop puller
John F. -- Friday, 16 December 2005, at 12:03 p.m.

Re: Prop puller
sean -- Monday, 19 December 2005, at 2:26 p.m.