Bertram31.com General Bulletin Board

Re: Prop puller *LINK*

Posted By: Rawleigh
Date: Thursday, 15 December 2005, at 10:04 a.m.

In Response To: Prop puller (Classic Trade)

I use one of these. Beating on the prop nut with a hammer too hard can damage the bearings in your gears. Grease the shafts good when you put the props back on. Most people here recommend Tefgell which can be bought from the ad in the "Links" section. Rawleigh

http://www.westmarine.com/webapp/wcs/stores/servlet/product/10001/-1/10001/72828

Messages In This Thread

Prop puller
Classic Trade -- Thursday, 15 December 2005, at 9:20 a.m.

Re: Prop puller *LINK*
Rawleigh -- Thursday, 15 December 2005, at 10:04 a.m.

Re: Prop puller
Capt. Dick Dean -- Thursday, 15 December 2005, at 10:53 a.m.

Re: Prop puller
Harv -- Thursday, 15 December 2005, at 11:52 a.m.

Re: Prop puller
Tony Meola -- Thursday, 15 December 2005, at 8:50 p.m.

Re: Prop puller
Mike Dolan -- Thursday, 15 December 2005, at 1:43 p.m.

Re: Prop puller
Scott -- Thursday, 15 December 2005, at 12:35 p.m.

Re: Prop puller
Ed C. -- Thursday, 15 December 2005, at 3:07 p.m.

Re: Prop puller
cwj -- Thursday, 15 December 2005, at 3:34 p.m.

Re: Prop puller
craig mac -- Thursday, 15 December 2005, at 4:08 p.m.

Re: Prop puller
Vic Roy -- Thursday, 15 December 2005, at 5:37 p.m.

Re: Prop puller
Scott -- Thursday, 15 December 2005, at 7:28 p.m.

Re: Prop puller
Vic Roy -- Thursday, 15 December 2005, at 8:35 p.m.

Re: Prop puller
Rawleigh -- Thursday, 15 December 2005, at 10:52 p.m.

Re: Prop puller
Classic Trade -- Friday, 16 December 2005, at 9:17 a.m.

Re: Prop puller
John F. -- Friday, 16 December 2005, at 10:27 a.m.

Re: Prop puller
Classic Trade -- Friday, 16 December 2005, at 11:53 a.m.

Re: Prop puller
John F. -- Friday, 16 December 2005, at 12:03 p.m.

Re: Prop puller
sean -- Monday, 19 December 2005, at 2:26 p.m.