Bertram31.com General Bulletin Board

Re: Glassing bulk heads / Hard spots

Posted By: Capt. Dave Kosh
Date: Monday, 12 December 2005, at 4:19 p.m.

In Response To: Re: Glassing bulk heads / Hard spots (John Frye)

What about the flybridge deck pillasters? Mine are not glassed to the deck (looks not too good with caulk). I was going to tab the deck to the pillasters using 3 layers of #6 FB then filleting thickend epoxy medium to microballons for the final contour? Dave K

Messages In This Thread

Glassing bulk heads / Hard spots
Jim Kilbane -- Saturday, 10 December 2005, at 10:16 p.m.

Re: Glassing bulk heads / Hard spots
Capt Partick McCrary -- Saturday, 10 December 2005, at 10:30 p.m.

Re: Glassing bulk heads / Hard spots
Ian Upton -- Sunday, 11 December 2005, at 8:25 a.m.

Re: Glassing bulk heads / Hard spots
CMP -- Sunday, 11 December 2005, at 8:58 a.m.

Re: Glassing bulk heads / Hard spots *PIC*
Capt Partick McCrary -- Sunday, 11 December 2005, at 2:30 p.m.

Re: Glassing bulk heads / Hard spots
CMP -- Sunday, 11 December 2005, at 3:11 p.m.

Re: Glassing bulk heads / Hard spots
phil -- Sunday, 11 December 2005, at 4:23 p.m.

Re: Glassing bulk heads / Hard spots
Capt Partick McCrary -- Sunday, 11 December 2005, at 5:01 p.m.

Re: Glassing bulk heads / Hard spots
Jim Kilbane -- Sunday, 11 December 2005, at 7:46 p.m.

Re: Glassing bulk heads / Hard spots
John Davis -- Monday, 12 December 2005, at 11:16 a.m.

Re: Glassing bulk heads / Hard spots
druck -- Sunday, 11 December 2005, at 9:15 p.m.

Re: Glassing bulk heads / Hard spots
Bill -- Monday, 12 December 2005, at 11:16 a.m.

Re: Glassing bulk heads / Hard spots
John Frye -- Sunday, 11 December 2005, at 9:46 p.m.

Re: Glassing bulk heads / Hard spots
Capt. Dave Kosh -- Monday, 12 December 2005, at 4:19 p.m.

Re: Glassing bulk heads / Hard spots
JP -- Monday, 12 December 2005, at 5:54 p.m.

Clarifications.........
Capt Partick McCrary -- Monday, 12 December 2005, at 8:32 p.m.