Bertram31.com General Bulletin Board

Re: Glassing bulk heads / Hard spots

Posted By: John Davis
Date: Monday, 12 December 2005, at 11:16 a.m.

In Response To: Re: Glassing bulk heads / Hard spots (Capt Partick McCrary)

Capt Pat,
How about the battery shelves? I have those hard glassed and tabbed to the side outside the engines and screwed down to the vertical support under the shelf and the cabin and engine bulkheads. My engine bulkhead is also hard glassed to the side. Guess I'd better get out the sawsall. The other area I have hard glassed to the hull is the shelf at the transom that the rear edge of my decks sit on. Hopefully that is far enough back that it won't hinder the hulls flexibility or induce stress on the hull. What are your thoughts? Thanks.
John

Messages In This Thread

Glassing bulk heads / Hard spots
Jim Kilbane -- Saturday, 10 December 2005, at 10:16 p.m.

Re: Glassing bulk heads / Hard spots
Capt Partick McCrary -- Saturday, 10 December 2005, at 10:30 p.m.

Re: Glassing bulk heads / Hard spots
Ian Upton -- Sunday, 11 December 2005, at 8:25 a.m.

Re: Glassing bulk heads / Hard spots
CMP -- Sunday, 11 December 2005, at 8:58 a.m.

Re: Glassing bulk heads / Hard spots *PIC*
Capt Partick McCrary -- Sunday, 11 December 2005, at 2:30 p.m.

Re: Glassing bulk heads / Hard spots
CMP -- Sunday, 11 December 2005, at 3:11 p.m.

Re: Glassing bulk heads / Hard spots
phil -- Sunday, 11 December 2005, at 4:23 p.m.

Re: Glassing bulk heads / Hard spots
Capt Partick McCrary -- Sunday, 11 December 2005, at 5:01 p.m.

Re: Glassing bulk heads / Hard spots
Jim Kilbane -- Sunday, 11 December 2005, at 7:46 p.m.

Re: Glassing bulk heads / Hard spots
John Davis -- Monday, 12 December 2005, at 11:16 a.m.

Re: Glassing bulk heads / Hard spots
druck -- Sunday, 11 December 2005, at 9:15 p.m.

Re: Glassing bulk heads / Hard spots
Bill -- Monday, 12 December 2005, at 11:16 a.m.

Re: Glassing bulk heads / Hard spots
John Frye -- Sunday, 11 December 2005, at 9:46 p.m.

Re: Glassing bulk heads / Hard spots
Capt. Dave Kosh -- Monday, 12 December 2005, at 4:19 p.m.

Re: Glassing bulk heads / Hard spots
JP -- Monday, 12 December 2005, at 5:54 p.m.

Clarifications.........
Capt Partick McCrary -- Monday, 12 December 2005, at 8:32 p.m.