Bertram31.com General Bulletin Board

Re: Glassing bulk heads / Hard spots

Posted By: John Frye
Date: Sunday, 11 December 2005, at 9:46 p.m.

In Response To: Glassing bulk heads / Hard spots (Jim Kilbane)

Okay, I just replaced the beam under my 35b's salon bulkhead and was going to fiberglass it to the hull sides. I was going to fillet it with thickened epoxy first.Is this the wrong way to do it? I was also going to do this to the bulkhead/beam joint and the deck/beam joint. I still have time to change it if there is a better way.
Thanks

Messages In This Thread

Glassing bulk heads / Hard spots
Jim Kilbane -- Saturday, 10 December 2005, at 10:16 p.m.

Re: Glassing bulk heads / Hard spots
Capt Partick McCrary -- Saturday, 10 December 2005, at 10:30 p.m.

Re: Glassing bulk heads / Hard spots
Ian Upton -- Sunday, 11 December 2005, at 8:25 a.m.

Re: Glassing bulk heads / Hard spots
CMP -- Sunday, 11 December 2005, at 8:58 a.m.

Re: Glassing bulk heads / Hard spots *PIC*
Capt Partick McCrary -- Sunday, 11 December 2005, at 2:30 p.m.

Re: Glassing bulk heads / Hard spots
CMP -- Sunday, 11 December 2005, at 3:11 p.m.

Re: Glassing bulk heads / Hard spots
phil -- Sunday, 11 December 2005, at 4:23 p.m.

Re: Glassing bulk heads / Hard spots
Capt Partick McCrary -- Sunday, 11 December 2005, at 5:01 p.m.

Re: Glassing bulk heads / Hard spots
Jim Kilbane -- Sunday, 11 December 2005, at 7:46 p.m.

Re: Glassing bulk heads / Hard spots
John Davis -- Monday, 12 December 2005, at 11:16 a.m.

Re: Glassing bulk heads / Hard spots
druck -- Sunday, 11 December 2005, at 9:15 p.m.

Re: Glassing bulk heads / Hard spots
Bill -- Monday, 12 December 2005, at 11:16 a.m.

Re: Glassing bulk heads / Hard spots
John Frye -- Sunday, 11 December 2005, at 9:46 p.m.

Re: Glassing bulk heads / Hard spots
Capt. Dave Kosh -- Monday, 12 December 2005, at 4:19 p.m.

Re: Glassing bulk heads / Hard spots
JP -- Monday, 12 December 2005, at 5:54 p.m.

Clarifications.........
Capt Partick McCrary -- Monday, 12 December 2005, at 8:32 p.m.