Bertram31.com General Bulletin Board

Re: Glassing bulk heads / Hard spots

Posted By: Jim Kilbane
Date: Sunday, 11 December 2005, at 7:46 p.m.

In Response To: Re: Glassing bulk heads / Hard spots (Capt Partick McCrary)

After all that work of sanding an fitting to insure no pressure points and now I learn that I could have just ruff cut the bulk head to within a .250 or .500". Now I don't know if I should just leave it or cut it open and redo it. Shes all painted and the interior will be done this week. Go figure.

Jim

Messages In This Thread

Glassing bulk heads / Hard spots
Jim Kilbane -- Saturday, 10 December 2005, at 10:16 p.m.

Re: Glassing bulk heads / Hard spots
Capt Partick McCrary -- Saturday, 10 December 2005, at 10:30 p.m.

Re: Glassing bulk heads / Hard spots
Ian Upton -- Sunday, 11 December 2005, at 8:25 a.m.

Re: Glassing bulk heads / Hard spots
CMP -- Sunday, 11 December 2005, at 8:58 a.m.

Re: Glassing bulk heads / Hard spots *PIC*
Capt Partick McCrary -- Sunday, 11 December 2005, at 2:30 p.m.

Re: Glassing bulk heads / Hard spots
CMP -- Sunday, 11 December 2005, at 3:11 p.m.

Re: Glassing bulk heads / Hard spots
phil -- Sunday, 11 December 2005, at 4:23 p.m.

Re: Glassing bulk heads / Hard spots
Capt Partick McCrary -- Sunday, 11 December 2005, at 5:01 p.m.

Re: Glassing bulk heads / Hard spots
Jim Kilbane -- Sunday, 11 December 2005, at 7:46 p.m.

Re: Glassing bulk heads / Hard spots
John Davis -- Monday, 12 December 2005, at 11:16 a.m.

Re: Glassing bulk heads / Hard spots
druck -- Sunday, 11 December 2005, at 9:15 p.m.

Re: Glassing bulk heads / Hard spots
Bill -- Monday, 12 December 2005, at 11:16 a.m.

Re: Glassing bulk heads / Hard spots
John Frye -- Sunday, 11 December 2005, at 9:46 p.m.

Re: Glassing bulk heads / Hard spots
Capt. Dave Kosh -- Monday, 12 December 2005, at 4:19 p.m.

Re: Glassing bulk heads / Hard spots
JP -- Monday, 12 December 2005, at 5:54 p.m.

Clarifications.........
Capt Partick McCrary -- Monday, 12 December 2005, at 8:32 p.m.