Bertram31.com General Bulletin Board

Re: Glassing bulk heads / Hard spots

Posted By: Ian Upton
Date: Sunday, 11 December 2005, at 8:25 a.m.

In Response To: Re: Glassing bulk heads / Hard spots (Capt Partick McCrary)

OK, this seems counterintuitive...

I can partially understand this on the hull sides, but shouldn't the bulkhead/stringers be hard tabbed to the hull bottom, around the chines, etc.

Confused...

Ian.

Messages In This Thread

Glassing bulk heads / Hard spots
Jim Kilbane -- Saturday, 10 December 2005, at 10:16 p.m.

Re: Glassing bulk heads / Hard spots
Capt Partick McCrary -- Saturday, 10 December 2005, at 10:30 p.m.

Re: Glassing bulk heads / Hard spots
Ian Upton -- Sunday, 11 December 2005, at 8:25 a.m.

Re: Glassing bulk heads / Hard spots
CMP -- Sunday, 11 December 2005, at 8:58 a.m.

Re: Glassing bulk heads / Hard spots *PIC*
Capt Partick McCrary -- Sunday, 11 December 2005, at 2:30 p.m.

Re: Glassing bulk heads / Hard spots
CMP -- Sunday, 11 December 2005, at 3:11 p.m.

Re: Glassing bulk heads / Hard spots
phil -- Sunday, 11 December 2005, at 4:23 p.m.

Re: Glassing bulk heads / Hard spots
Capt Partick McCrary -- Sunday, 11 December 2005, at 5:01 p.m.

Re: Glassing bulk heads / Hard spots
Jim Kilbane -- Sunday, 11 December 2005, at 7:46 p.m.

Re: Glassing bulk heads / Hard spots
John Davis -- Monday, 12 December 2005, at 11:16 a.m.

Re: Glassing bulk heads / Hard spots
druck -- Sunday, 11 December 2005, at 9:15 p.m.

Re: Glassing bulk heads / Hard spots
Bill -- Monday, 12 December 2005, at 11:16 a.m.

Re: Glassing bulk heads / Hard spots
John Frye -- Sunday, 11 December 2005, at 9:46 p.m.

Re: Glassing bulk heads / Hard spots
Capt. Dave Kosh -- Monday, 12 December 2005, at 4:19 p.m.

Re: Glassing bulk heads / Hard spots
JP -- Monday, 12 December 2005, at 5:54 p.m.

Clarifications.........
Capt Partick McCrary -- Monday, 12 December 2005, at 8:32 p.m.