Bertram31.com General Bulletin Board

Re: Question for Bruce

Posted By: Capt Partick McCrary
Date: Saturday, 10 December 2005, at 7:12 p.m.

In Response To: Re: Question for Bruce (Tommy)

Tommy,

Assuming that the rudders are stock & undersized, & if Cross is going to upgrade to new oversized rudders, just cut the shafts between the packing nut & the tiller arm, (below the rudder shelf).

The blades will drop right out. Remove the flange bearing bolts, (use a hight speed metal cutting disk to slice the nuts or heads off if there're frozen), loosen the tiller arm bolts, remove the locking collars, if there, and it's all lift out.

Br,

Patrick

Messages In This Thread

Question for Bruce
cross -- Saturday, 10 December 2005, at 3:39 p.m.

Re: Question for Bruce
Tommy -- Saturday, 10 December 2005, at 4:06 p.m.

Re: Question for Bruce
Capt Partick McCrary -- Saturday, 10 December 2005, at 7:12 p.m.

Re: Question for Bruce
Bruce -- Saturday, 10 December 2005, at 8:54 p.m.

Re: Question for Bruce
cross -- Sunday, 11 December 2005, at 9:11 a.m.

Re: Question for Bruce
Bruce -- Sunday, 11 December 2005, at 10:28 a.m.

Re: Question for Bruce
CMP -- Sunday, 11 December 2005, at 1:39 p.m.

Re: Question for Bruce
Bruce -- Sunday, 11 December 2005, at 6:54 p.m.

Re: Question for Bruce
CMP -- Monday, 12 December 2005, at 8:29 a.m.

Re: Question for Bruce
Bruce -- Monday, 12 December 2005, at 7:45 p.m.