Bertram31.com General Bulletin Board

Re: draining Yanmars

Posted By: bruce
Date: Thursday, 8 December 2005, at 4:42 p.m.

In Response To: Re: draining Yanmars (John Cranston)

John,
Just pouring anti freeze in without mixing won't work.
I would just drain the fresh water side. The drains are pretty obvious with clear hoses about 10" long on the block and the heat and oil exchangers depending on the model.

A round knob about 5/8" diameter opens the drain on each one.

If you need a picture diagram, call or email me the models and a fax number to send it to you.

Messages In This Thread

draining Yanmars
John Cranston -- Wednesday, 7 December 2005, at 11:15 p.m.

Re: draining Yanmars
Walter Kaprielian -- Wednesday, 7 December 2005, at 11:44 p.m.

Re: draining Yanmars
bruce -- Thursday, 8 December 2005, at 6:52 a.m.

Re: draining Yanmars
John Cranston -- Thursday, 8 December 2005, at 11:33 a.m.

Re: draining Yanmars
bruce -- Thursday, 8 December 2005, at 4:42 p.m.

Re: draining Yanmars
Rawleigh -- Thursday, 8 December 2005, at 5:16 p.m.

Re: draining Yanmars
John Cranston -- Thursday, 8 December 2005, at 6:42 p.m.