Bertram31.com General Bulletin Board

Re: smooth hull

Posted By: Capt. Dick Dean
Date: Saturday, 5 November 2005, at 4:44 p.m.

In Response To: Re: smooth hull *LINK* (Gary Gibson)

Last yr at this time I had the hull sand blasted and in the spring use INTERLUX, the Inter Protect 3000 Kit.This is a barrier coat process.I did the barrier coat myself. It will fill in minor blisters and pock marks. It's like mud. I put three coats on, then painted two coats ablative paint. Also INTLUX micron CSC.

Boat is fast. Very fast!

Messages In This Thread

smooth hull
phil -- Saturday, 5 November 2005, at 7:19 a.m.

Re: smooth hull
Kevin -- Saturday, 5 November 2005, at 1:43 p.m.

Re: smooth hull
Ken -- Saturday, 5 November 2005, at 1:51 p.m.

Re: smooth hull *LINK*
Gary Gibson -- Saturday, 5 November 2005, at 2:46 p.m.

Re: smooth hull
Capt. Dick Dean -- Saturday, 5 November 2005, at 4:44 p.m.

Re: smooth hull
ken waters -- Monday, 7 November 2005, at 7:31 a.m.

Re: smooth hull
Capt. Dave Kosh -- Monday, 7 November 2005, at 10:58 a.m.

Re: smooth hull
Tom Annulli -- Monday, 7 November 2005, at 1:14 p.m.

Re: smooth hull
phil -- Monday, 7 November 2005, at 8:29 p.m.

Re: smooth hull
phil -- Monday, 7 November 2005, at 8:30 p.m.

Re: smooth hull
guy -- Tuesday, 8 November 2005, at 6:18 a.m.

Re: smooth hull
Tom Annulli -- Tuesday, 8 November 2005, at 11:38 a.m.

Re: smooth hull
phil -- Tuesday, 8 November 2005, at 4:22 p.m.

Re: smooth hull
Tom Annulli -- Tuesday, 8 November 2005, at 9:29 p.m.