Bertram31.com General Bulletin Board

Re: alignment tolerances

Posted By: Capt. Dave Kosh
Date: Tuesday, 23 August 2005, at 9:18 a.m.

In Response To: alignment tolerances (John Davis)

Should be OK les than .004" You may want to try for better but I think your close enough. Do you have any viberation? I just checked my port recently and had 0-0-0-.0015 at 90 degree increments. I have a harmonic at 900 rpm on my port. It's allways been that way.Ask the experts and get someone with experience to check it with you for a second opinion if you are in doubt.
Dave K

Messages In This Thread

alignment tolerances
John Davis -- Monday, 22 August 2005, at 10:57 p.m.

Re: alignment tolerances
Capt. Dave Kosh -- Tuesday, 23 August 2005, at 9:18 a.m.

Re: alignment tolerances
John Davis -- Tuesday, 23 August 2005, at 9:37 a.m.

Re: alignment tolerances
Rawleigh -- Tuesday, 23 August 2005, at 9:57 a.m.

Re: alignment tolerances
John Davis -- Tuesday, 23 August 2005, at 5:24 p.m.