Bertram31.com General Bulletin Board

Re: chrysler 318 bent valve/pushrod

Posted By: Rawleigh
Date: Friday, 19 August 2005, at 3:43 p.m.

In Response To: Re: chrysler 318 bent valve/pushrod (Kevin Mehegan)

Kevin: You might take a close look at your rocker arms, fulcums and stud to make sure nothing is worn or bent. I've got 440's 330HPin my 31, and despite all of the bad press you hear I've had very little problem with them. I did tulip a valve from bad gas, but nothing has broken. They purr like kittens. Gas consumption is the only problem at @ 25 GPH at 2800 cruise. Rawleigh

Messages In This Thread

chrysler 318 bent valve/pushrod
Kevin Mehegan -- Wednesday, 17 August 2005, at 10:23 p.m.

Re: chrysler 318 bent valve/pushrod
Dug -- Thursday, 18 August 2005, at 8:31 a.m.

Re: chrysler 318 bent valve/pushrod
Carl -- Thursday, 18 August 2005, at 8:40 a.m.

Re: chrysler 318 bent valve/pushrod
Mitch -- Thursday, 18 August 2005, at 8:16 p.m.

Re: chrysler 318 bent valve/pushrod
Kevin Mehegan -- Thursday, 18 August 2005, at 11:08 p.m.

Re: chrysler 318 bent valve/pushrod
Rawleigh -- Friday, 19 August 2005, at 3:43 p.m.