Bertram31.com General Bulletin Board

Re: chrysler 318 bent valve/pushrod

Posted By: Mitch
Date: Thursday, 18 August 2005, at 8:16 p.m.

In Response To: chrysler 318 bent valve/pushrod (Kevin Mehegan)

It would be wierd to have one cyl lean on a carb engine unless you had a vacuum leak at the intake. If the exhaust manifold had a small leak and water was seaping into that cylinder causing deposits around the stem. or maybe just a 35 year old engine that decide to throw you a valve. Dug's got a point, you got your money's worth out of those old mopars. Stay within SEATOW range or repower soon........ Good Luck Mitch

Messages In This Thread

chrysler 318 bent valve/pushrod
Kevin Mehegan -- Wednesday, 17 August 2005, at 10:23 p.m.

Re: chrysler 318 bent valve/pushrod
Dug -- Thursday, 18 August 2005, at 8:31 a.m.

Re: chrysler 318 bent valve/pushrod
Carl -- Thursday, 18 August 2005, at 8:40 a.m.

Re: chrysler 318 bent valve/pushrod
Mitch -- Thursday, 18 August 2005, at 8:16 p.m.

Re: chrysler 318 bent valve/pushrod
Kevin Mehegan -- Thursday, 18 August 2005, at 11:08 p.m.

Re: chrysler 318 bent valve/pushrod
Rawleigh -- Friday, 19 August 2005, at 3:43 p.m.