Bertram31.com General Bulletin Board

Help- Brucs/anyone

Posted By: JIMMYG.
Date: Tuesday, 16 August 2005, at 5:09 p.m.

Bruce,

I have tried everything I rewired the AC with # 10 wire, installed a larger amp breaker I just put in a new transformer Mermaid marine sent me and last but not least a hard start kit and nothing works! I turned on the heating part (electric heat) and the Gen set runs it, the amp draw is around 15.5 amps, one time I switched from heat to AC and it actually worked I shut it on and off for the next half hour 4 times and it ran the AC each time I thought I had it working. I went down the next weekend and couldn't get it to work again! Is there anything I can do to the Gen set to get that little bit more I need to start the compressor? any advise would be much appreciated, thanks Jimmy Gatto