Bertram31.com General Bulletin Board

Re: Shaft, Rudder, Wheel Q

Posted By: Vic Roy
Date: Tuesday, 12 July 2005, at 4:40 p.m.

In Response To: Re: Shaft, Rudder, Wheel Q (bruce)

Ernest - I found a real easy solution to this problem. When I got the new & improved Capt. Patrick rudders, I had a machine shop cut the shaft right at the rudder blade and thread it (left hand) and now I can just unscrew the rudder blades and leaves plenty of room.

Yo Fren'

UV

Messages In This Thread

Shaft, Rudder, Wheel Q
Ernest -- Tuesday, 12 July 2005, at 3:50 p.m.

Re: Shaft, Rudder, Wheel Q
andre fourrier-Louisiana -- Tuesday, 12 July 2005, at 4:10 p.m.

Re: Shaft, Rudder, Wheel Q
bruce -- Tuesday, 12 July 2005, at 4:32 p.m.

Re: Shaft, Rudder, Wheel Q
Vic Roy -- Tuesday, 12 July 2005, at 4:40 p.m.

Re: Shaft, Rudder, Wheel Q
Carl -- Tuesday, 12 July 2005, at 5:23 p.m.

Re: Shaft, Rudder, Wheel Q
Vic Roy -- Tuesday, 12 July 2005, at 5:34 p.m.

Re: Shaft, Rudder, Wheel Q
Capt Patrick McCrary -- Tuesday, 12 July 2005, at 6:28 p.m.

Re: Shaft, Rudder, Wheel Q
Ernest -- Tuesday, 12 July 2005, at 7:36 p.m.

Re: Shaft, Rudder, Wheel Q
Capt Patrick McCrary -- Tuesday, 12 July 2005, at 7:50 p.m.

Re: Shaft, Rudder, Wheel Q
Vic Roy -- Tuesday, 12 July 2005, at 8:03 p.m.

Re: Shaft, Rudder, Wheel Q
Capt Patrick McCrary -- Tuesday, 12 July 2005, at 8:19 p.m.

Re: Shaft, Rudder, Wheel Q
Ernest -- Tuesday, 12 July 2005, at 5:44 p.m.

Re: Shaft, Rudder, Wheel Q
Ernest -- Tuesday, 12 July 2005, at 5:58 p.m.

Re: Shaft, Rudder, Wheel Q
Scott Deskins -- Tuesday, 12 July 2005, at 9:38 p.m.

Re: Shaft, Rudder, Wheel Q
Capt. Mike Holmes -- Tuesday, 12 July 2005, at 10:37 p.m.

Re: Shaft, Rudder, Wheel Q
Carl -- Wednesday, 13 July 2005, at 10:23 a.m.

Re: Shaft, Rudder, Wheel Q
Capt. Dave Kosh -- Wednesday, 13 July 2005, at 12:27 p.m.

Re: Shaft, Rudder, Wheel Q
Carl -- Wednesday, 13 July 2005, at 1:52 p.m.