Bertram31.com General Bulletin Board

Re: 440 timing

Posted By: Ken Ching
Date: Friday, 24 June 2005, at 9:41 p.m.

In Response To: Re: 440 timing (bruce)

If you use the flywheel for timing and you find TDC, you would have to degree the flywheel . otherwise you would not know how may degrees you are advancing. Best way is damper. You can buy a degreed tape from racing parts store if you know the diameter of the damper. Ken

Messages In This Thread

440 timing
Carl -- Thursday, 23 June 2005, at 10:14 a.m.

Re: 440 timing
Rawleigh -- Thursday, 23 June 2005, at 3:28 p.m.

Re: 440 timing
bruce -- Thursday, 23 June 2005, at 3:57 p.m.

Re: 440 timing
Carl -- Thursday, 23 June 2005, at 5:25 p.m.

Re: 440 timing
Rocket -- Thursday, 23 June 2005, at 6:37 p.m.

Re: 440 timing
bruce -- Thursday, 23 June 2005, at 8:23 p.m.

Re: 440 timing
bruce -- Thursday, 23 June 2005, at 8:34 p.m.

Re: 440 timing
Rocket -- Thursday, 23 June 2005, at 8:45 p.m.

Re: 440 timing
Carl -- Friday, 24 June 2005, at 8:53 a.m.

Re: 440 timing
bruce -- Friday, 24 June 2005, at 10:21 a.m.

Re: 440 timing
Carl -- Friday, 24 June 2005, at 12:25 p.m.

Re: 440 timing
bruce -- Friday, 24 June 2005, at 5:22 p.m.

Re: 440 timing
Ken Ching -- Friday, 24 June 2005, at 9:41 p.m.

Re: 440 timing
Rawleigh -- Sunday, 26 June 2005, at 9:49 a.m.

Re: 440 timing
Carl -- Monday, 27 June 2005, at 8:08 a.m.