Bertram31.com General Bulletin Board

Re: 440 timing

Posted By: bruce
Date: Friday, 24 June 2005, at 5:22 p.m.

In Response To: Re: 440 timing (Carl)

Pull all the plugs so the engine turns easy.
Use a socket on the crank.

Bend a coat hanger to go into #1 cylinder.

Rotate engine till coat hanger stops moving up and starts to go down. Go back to top of stroke.

Check rotor to see if you are on TDC or 180 out.

If TDC you should be on the 0 mark.

Messages In This Thread

440 timing
Carl -- Thursday, 23 June 2005, at 10:14 a.m.

Re: 440 timing
Rawleigh -- Thursday, 23 June 2005, at 3:28 p.m.

Re: 440 timing
bruce -- Thursday, 23 June 2005, at 3:57 p.m.

Re: 440 timing
Carl -- Thursday, 23 June 2005, at 5:25 p.m.

Re: 440 timing
Rocket -- Thursday, 23 June 2005, at 6:37 p.m.

Re: 440 timing
bruce -- Thursday, 23 June 2005, at 8:23 p.m.

Re: 440 timing
bruce -- Thursday, 23 June 2005, at 8:34 p.m.

Re: 440 timing
Rocket -- Thursday, 23 June 2005, at 8:45 p.m.

Re: 440 timing
Carl -- Friday, 24 June 2005, at 8:53 a.m.

Re: 440 timing
bruce -- Friday, 24 June 2005, at 10:21 a.m.

Re: 440 timing
Carl -- Friday, 24 June 2005, at 12:25 p.m.

Re: 440 timing
bruce -- Friday, 24 June 2005, at 5:22 p.m.

Re: 440 timing
Ken Ching -- Friday, 24 June 2005, at 9:41 p.m.

Re: 440 timing
Rawleigh -- Sunday, 26 June 2005, at 9:49 a.m.

Re: 440 timing
Carl -- Monday, 27 June 2005, at 8:08 a.m.