Bertram31.com General Bulletin Board

Re: 440 timing

Posted By: Carl
Date: Friday, 24 June 2005, at 12:25 p.m.

In Response To: Re: 440 timing (bruce)

Thank you, thats what I was planning on doing to check the mark. Just didn't think it could be off so far and still run worth a hoot. Getting into a position to find TDC takes me quite some time.

Just thinking about it I should be able to get a rough idea with the rotor, correct. I was thinking I needed to pull the plug and remove the heat exchanger and related hosing to find the exact TDC thru the plug hole, but the flywheel is already marked and I just need to shine up the correct mark to differentiate from any other mark I may be using, sound right? Well if its not pronouced I'll rip the stuff off and Locate TDC and mark it well this time.

It figures, I remembered to do put a distinctive mark on the other engines flywheel when I had the Heads off. Forgot to do this one.

Thanks
Carl

Messages In This Thread

440 timing
Carl -- Thursday, 23 June 2005, at 10:14 a.m.

Re: 440 timing
Rawleigh -- Thursday, 23 June 2005, at 3:28 p.m.

Re: 440 timing
bruce -- Thursday, 23 June 2005, at 3:57 p.m.

Re: 440 timing
Carl -- Thursday, 23 June 2005, at 5:25 p.m.

Re: 440 timing
Rocket -- Thursday, 23 June 2005, at 6:37 p.m.

Re: 440 timing
bruce -- Thursday, 23 June 2005, at 8:23 p.m.

Re: 440 timing
bruce -- Thursday, 23 June 2005, at 8:34 p.m.

Re: 440 timing
Rocket -- Thursday, 23 June 2005, at 8:45 p.m.

Re: 440 timing
Carl -- Friday, 24 June 2005, at 8:53 a.m.

Re: 440 timing
bruce -- Friday, 24 June 2005, at 10:21 a.m.

Re: 440 timing
Carl -- Friday, 24 June 2005, at 12:25 p.m.

Re: 440 timing
bruce -- Friday, 24 June 2005, at 5:22 p.m.

Re: 440 timing
Ken Ching -- Friday, 24 June 2005, at 9:41 p.m.

Re: 440 timing
Rawleigh -- Sunday, 26 June 2005, at 9:49 a.m.

Re: 440 timing
Carl -- Monday, 27 June 2005, at 8:08 a.m.