Bertram31.com General Bulletin Board

Re: Wet foam removal on a B20

Posted By: Rocket
Date: Monday, 13 June 2005, at 11:46 p.m.

In Response To: Re: Wet foam removal on a B20 (mike ohlstein)

Mike, 2.00 now were getting serious. The transom on the baron is easy to inspect as there is a hole where the drive used to be. There is some delamination right at the edges, but a screwdriver wil only go a short way in and the wood is not moist. I do have a guy who inspects my paper with a moisture meter, so I'll get him to probe it. I have to cut the transom back a bit to re-size the cut out for a different drive so I'll get a better sense then. Thanks for the feedback it is much appreciated.

Messages In This Thread

Wet foam removal on a B20
Rocket -- Monday, 13 June 2005, at 10:38 p.m.

Re: Wet foam removal on a B20
Peter -- Monday, 13 June 2005, at 10:56 p.m.

Re: Wet foam removal on a B20
mike ohlstein -- Monday, 13 June 2005, at 10:59 p.m.

Re: Wet foam removal on a B20
Rocket -- Monday, 13 June 2005, at 11:46 p.m.

Re: Wet foam removal on a B20
Ian Upton -- Tuesday, 14 June 2005, at 12:30 a.m.

Re: Wet foam removal on a B20
Dug -- Tuesday, 14 June 2005, at 8:07 a.m.

Re: Wet foam removal on a B20
Peter -- Tuesday, 14 June 2005, at 10:22 a.m.

Re: Wet foam removal on a B20
Rocket -- Tuesday, 14 June 2005, at 11:27 a.m.

Re: Wet foam removal on a B20
CMP -- Tuesday, 14 June 2005, at 11:30 a.m.

Re: Wet foam removal on a B20
mike ohlstein -- Tuesday, 14 June 2005, at 11:45 a.m.

Re: Wet foam removal on a B20
Ian Upton -- Tuesday, 14 June 2005, at 11:31 p.m.

Re: Wet foam removal on a B20
Rocket -- Tuesday, 14 June 2005, at 11:57 p.m.

Re: Wet foam removal on a B20
Walter Kaprielian -- Tuesday, 14 June 2005, at 10:25 a.m.

Re: Wet foam removal on a B20
Ian Upton -- Thursday, 16 June 2005, at 3:16 a.m.

Re: Wet foam removal on a B20
Walter Kaprielian -- Thursday, 16 June 2005, at 10:11 a.m.

Re: Wet foam removal on a B20
Robert Rae -- Tuesday, 14 June 2005, at 1:58 p.m.

Re: Wet foam removal on a B20
Rocket -- Tuesday, 14 June 2005, at 9:58 p.m.