Bertram31.com General Bulletin Board

Re: heat exchanger cleaning

Posted By: Ken Ching
Date: Tuesday, 7 June 2005, at 6:49 p.m.

In Response To: heat exchanger cleaning (Rob)

Rob, you can take the end caps off the heat exchanger and use a brass rod that fits the diameter of the tubes. Cummins are 3/16 diameter. Same with the trans cooler, then flush with water. Or you can take to a radiator shop and have them hot tank them, and they will also pressure test for you. Ken

Messages In This Thread

heat exchanger cleaning
Rob -- Tuesday, 7 June 2005, at 6:37 p.m.

Re: heat exchanger cleaning
Ken Ching -- Tuesday, 7 June 2005, at 6:49 p.m.

Re: heat exchanger cleaning
Rob -- Tuesday, 7 June 2005, at 6:55 p.m.

Re: heat exchanger cleaning
Vic Roy -- Tuesday, 7 June 2005, at 7:01 p.m.

Re: heat exchanger cleaning
Rob -- Tuesday, 7 June 2005, at 7:06 p.m.

Re: heat exchanger cleaning
Ed C. -- Tuesday, 7 June 2005, at 7:34 p.m.

Re: heat exchanger cleaning
Vic Roy -- Tuesday, 7 June 2005, at 8:04 p.m.

Re: heat exchanger cleaning
Tom Annulli -- Wednesday, 8 June 2005, at 10:10 a.m.

Re: heat exchanger cleaning
Capt. Dave Kosh -- Wednesday, 8 June 2005, at 11:34 a.m.

Re: heat exchanger cleaning
Ernest -- Wednesday, 8 June 2005, at 12:01 p.m.

Re: heat exchanger cleaning
Capt. Dave Kosh -- Wednesday, 8 June 2005, at 12:08 p.m.

Re: heat exchanger cleaning
andre fourrier-Louisiana -- Wednesday, 8 June 2005, at 7:53 p.m.

Re: heat exchanger cleaning
Capt. Dave Kosh -- Thursday, 9 June 2005, at 11:29 a.m.