Bertram31.com General Bulletin Board

Re: Repowering Q's

Posted By: Ernest
Date: Wednesday, 18 May 2005, at 3:28 p.m.

In Response To: Re: Repowering Q's (Capt. Doug Q.)

Its a B28 thats being repowered w/ 2004 Yanmar 230's (now called 240's). Running twin disk 1.44 to 1 trannies - new. 1.5 inch shafts.

Rawleigh - the shaft length is the issue. I was about to have then cut/mfg'ed/made, and if I wanted to use drive savers, its now or perhaps never because of the additional space taken up by the drive savers.

Thanks for all the info guys.

Messages In This Thread

Repowering Q's
Ernest -- Tuesday, 17 May 2005, at 7:00 p.m.

Re: Repowering Q's
Walter Kaprielian -- Tuesday, 17 May 2005, at 7:36 p.m.

Re: Repowering Q's
Vic Roy -- Tuesday, 17 May 2005, at 8:09 p.m.

Re: Repowering Q's
Bill Fuller -- Tuesday, 17 May 2005, at 10:14 p.m.

Re: Repowering Q's
Ernest -- Wednesday, 18 May 2005, at 9:44 a.m.

Re: Repowering Q's
Bill Fuller -- Wednesday, 18 May 2005, at 11:08 a.m.

Re: Repowering Q's
Scott D -- Tuesday, 17 May 2005, at 8:50 p.m.

Re: Repowering Q's
Harv -- Tuesday, 17 May 2005, at 11:29 p.m.

Re: Repowering Q's
Scott Deskins -- Wednesday, 18 May 2005, at 7:10 a.m.

Re: Repowering Q's
Scott Deskins -- Wednesday, 18 May 2005, at 7:31 a.m.

Re: Repowering Q's
Harv -- Wednesday, 18 May 2005, at 10:20 a.m.

Re: Repowering Q's
Scott Deskins -- Wednesday, 18 May 2005, at 10:43 a.m.

Re: Repowering Q's
Scott Deskins -- Wednesday, 18 May 2005, at 12:01 p.m.

Re: Repowering Q's
Rawleigh -- Wednesday, 18 May 2005, at 1:30 p.m.

Re: Repowering Q's
Capt. Doug Q. -- Wednesday, 18 May 2005, at 1:53 p.m.

Re: Repowering Q's
Ernest -- Wednesday, 18 May 2005, at 3:28 p.m.

Re: Repowering Q's
Bill Fuller -- Wednesday, 18 May 2005, at 3:41 p.m.

Re: Repowering Q's
Ernest -- Wednesday, 18 May 2005, at 4:30 p.m.

Re: Repowering Q's
Capt. Mike Holmes -- Wednesday, 18 May 2005, at 6:43 p.m.

Re: Repowering Q's
Vic Roy -- Wednesday, 18 May 2005, at 8:48 p.m.

Re: Repowering Q's
Capt. Mike Holmes -- Wednesday, 18 May 2005, at 9:25 p.m.