Bertram31.com General Bulletin Board

Foaming In Fuel Tank Question

Posted By: Capt. Dave Kosh
Date: Wednesday, 18 May 2005, at 11:46 a.m.

Faithful,

The plan is to install my 62 gallon aux tank in tonite.When I foam it in would it be OK to use bubble wrap for a dam at the bottom for the foam. Using PVC strips will not be air/liquid tight for the liquid foam. Help is needed here as this is my first one to be foamed in.I did use PVC strips to support the tank at the bottom and for water drainage and chaf prevention around the strut nuts. Also Polyurathane caulk was used on the tops of the strut nuts for further protection. Dave K

Messages In This Thread

Foaming In Fuel Tank Question
Capt. Dave Kosh -- Wednesday, 18 May 2005, at 11:46 a.m.

Re: Foaming In Fuel Tank Question
Scott Deskins -- Wednesday, 18 May 2005, at 12:07 p.m.

Re: Foaming In Fuel Tank Question
Capt. Dave Kosh -- Wednesday, 18 May 2005, at 12:23 p.m.

Re: Foaming In Fuel Tank Question
CMP -- Wednesday, 18 May 2005, at 12:34 p.m.

Re: Foaming In Fuel Tank Question
Capt. Dave Kosh -- Wednesday, 18 May 2005, at 12:57 p.m.

Re: Foaming In Fuel Tank Question
Mikey -- Saturday, 21 May 2005, at 11:48 a.m.

Re: Foaming In Fuel Tank Question
Mikey -- Friday, 20 May 2005, at 6:50 p.m.

Re: Foaming In Fuel Tank Question *LINK*
AL C. -- Friday, 20 May 2005, at 7:43 p.m.

Re: Foaming In Fuel Tank Question
Mitch -- Friday, 20 May 2005, at 9:00 p.m.

Re: Foaming In Fuel Tank Question
Capt. Dave Kosh -- Tuesday, 24 May 2005, at 11:02 a.m.