Bertram31.com General Bulletin Board

Re: Gas Engine/ Copper or Rubber Lines?

Posted By: Ian Upton
Date: Tuesday, 17 May 2005, at 2:22 a.m.

In Response To: Re: Gas Engine/ Copper or Rubber Lines? (Carl)

Carl,

As far as routing electrical wires, I'm planning on using some braided mesh sleeving(kinda like that old chinese finger 'handcuff') that you can get from McMaster Carr. (http://www.mcmaster.com/) see pg 711

A buddy of mine did this on his boat and it kept all of his wire bundles nice and neat. You can get multiple colors so you can route AC in a diferent colored mesh than the DC. You could get really nuts and have the positive and negative runs in different colors as well.

I'm going with Blue to route the minimal DC requirements on my B20.

Ian.

Messages In This Thread

Gas Engine/ Copper or Rubber Lines?
Carl -- Monday, 16 May 2005, at 8:12 a.m.

Re: Gas Engine/ Copper or Rubber Lines?
Walter Kaprielian -- Monday, 16 May 2005, at 9:45 a.m.

Re: Gas Engine/ Copper or Rubber Lines?
JohnV8r -- Monday, 16 May 2005, at 11:52 a.m.

Re: Gas Engine/ Copper or Rubber Lines?
Carl -- Monday, 16 May 2005, at 12:13 p.m.

Re: Gas Engine/ Copper or Rubber Lines?
Rich H -- Monday, 16 May 2005, at 12:30 p.m.

Re: Gas Engine/ Copper or Rubber Lines?
John F. -- Monday, 16 May 2005, at 12:41 p.m.

Re: Gas Engine/ Copper or Rubber Lines?
Carl -- Monday, 16 May 2005, at 3:01 p.m.

Re: Gas Engine/ Copper or Rubber Lines?
Chiles -- Monday, 16 May 2005, at 4:02 p.m.

Re: Gas Engine/ Copper or Rubber Lines?
John F. -- Monday, 16 May 2005, at 5:30 p.m.

Re: Gas Engine/ Copper or Rubber Lines?
Vic Roy -- Monday, 16 May 2005, at 7:39 p.m.

Re: Gas Engine/ Copper or Rubber Lines?
John F. -- Monday, 16 May 2005, at 9:05 p.m.

Re: Gas Engine/ Copper or Rubber Lines?
david jonesPaul -- Monday, 16 May 2005, at 9:46 a.m.

Re: Gas Engine/ Copper or Rubber Lines?
david jonesPaul -- Monday, 16 May 2005, at 9:51 a.m.

Re: Gas Engine/ Copper or Rubber Lines?
Carl -- Monday, 16 May 2005, at 8:16 p.m.

Re: Gas Engine/ Copper or Rubber Lines?
Vic Roy -- Monday, 16 May 2005, at 8:37 p.m.

Re: Gas Engine/ Copper or Rubber Lines?
Ian Upton -- Tuesday, 17 May 2005, at 2:22 a.m.

Re: Gas Engine/ Copper or Rubber Lines?
Carl -- Tuesday, 17 May 2005, at 8:59 a.m.

Re: Gas Engine/ Copper or Rubber Lines?
Capt. Dave Kosh -- Thursday, 19 May 2005, at 3:16 p.m.