Bertram31.com General Bulletin Board

Re: foam question

Posted By: Vic Roy
Date: Sunday, 15 May 2005, at 9:50 p.m.

In Response To: Re: foam question (bruce)

Thanks, Bruce. I shot the hot coils with the temp gun and was getting about 125 at first, then as the thing cooled off, dropped to about 98 with the output side going down to about 42. The funny thing about this was the huge Jabsco flex impeller pump was shooting water out the side of the boat like always. I have a set of gagues here at home I'll take and check it next week. The air filter was clean, but I took it out and cleaned it some more. Strange deal. Could be as simple as a lily pad getting sucked in the water intake for a few minutes and cutting the flow off, then washing off. Anyway, a good opportunity to get in there and shoot some CX where I usually can't get at.

We almost had some bodies last Thurs. at a small federal legal seminar (I was there) and our favorite G-Man was on top of it - a crazy with a gun stalking about 5 federal judges. He was taken down by the Marshalls. Story was in the Baton Rouge paper Sat. www.2theadvocate.com. In the Metro section.

UV

Messages In This Thread

foam question
Vic Roy -- Sunday, 15 May 2005, at 3:12 p.m.

Re: foam question
Terry -- Sunday, 15 May 2005, at 4:23 p.m.

Re: foam question
Vic Roy -- Sunday, 15 May 2005, at 5:14 p.m.

Re: foam question
bruce -- Sunday, 15 May 2005, at 9:12 p.m.

Re: foam question
Vic Roy -- Sunday, 15 May 2005, at 9:50 p.m.

Re: foam question
Wayne -- Sunday, 15 May 2005, at 8:11 p.m.

Re: foam question
Vic Roy -- Sunday, 15 May 2005, at 8:32 p.m.

Re: foam question
phil -- Sunday, 15 May 2005, at 9:15 p.m.

Re: foam question
Vic Roy -- Sunday, 15 May 2005, at 9:58 p.m.

Re: foam question
phil -- Sunday, 15 May 2005, at 10:03 p.m.

Re: foam question
Capt. Dave Kosh -- Tuesday, 17 May 2005, at 10:08 a.m.