Bertram31.com General Bulletin Board

Re: corrosion-X

Posted By: Vic Roy
Date: Thursday, 21 April 2005, at 3:41 p.m.

In Response To: Re: corrosion-X (Jerry Gomber)

I shoot the 50/50 on my Cummins white (actually called Cummins gray, for some reason, but it's white) with no adverse effects. There is nothing wrong with using the red straight, but it will leave a stikcy residue for a while that picks up dirt vs. the cut version that won't. The thinner flashes off so quick doubt weekly applications would soften the engine paint. Now a word of caution - the CX will work its way into every hose clamp and you will need to go over the engines, genset, plumbing, shaft logs, etc with a nut driver and tighten up the hose clamps a week or so after you shoot it. It's that good.

UV

Messages In This Thread

corrosion-X
brucedoan -- Thursday, 21 April 2005, at 1:41 p.m.

Re: corrosion-X
Vic Roy -- Thursday, 21 April 2005, at 2:17 p.m.

Re: corrosion-X
SteveC -- Thursday, 21 April 2005, at 2:26 p.m.

Re: corrosion-X
Vic Roy -- Thursday, 21 April 2005, at 2:49 p.m.

Re: corrosion-X
Jerry Gomber -- Thursday, 21 April 2005, at 2:56 p.m.

Re: corrosion-X
Vic Roy -- Thursday, 21 April 2005, at 3:41 p.m.

Re: corrosion-X
Jerry Gomber -- Thursday, 21 April 2005, at 3:58 p.m.

Re: corrosion-X
Vic Roy -- Thursday, 21 April 2005, at 4:09 p.m.

Re: corrosion-X
Capt. Dave Kosh -- Friday, 22 April 2005, at 10:21 a.m.

Re: corrosion-X
brucedoan -- Friday, 22 April 2005, at 11:48 a.m.