Bertram31.com General Bulletin Board

Re: Saw Advice Needed

Posted By: Paul Haggett
Date: Thursday, 21 April 2005, at 6:38 a.m.

In Response To: Re: Saw Advice Needed (John D)

I used a sawzall with a long blade so I could lay in flush along the hull and cut the tabbing. The long blade also allows you to cut down between the stringers and vertical supports to cut the bolts. I also used a diamond blade to clean up the tabbing remnants. I left the two side supports that run lengthwise as they were in really good condition. I'll have to add some more glass to the tabbing however since a couple were broken. Of course by doing this you create a months work putting this all back together.....

Messages In This Thread

Saw Advice Needed
Capt. Dave Kosh -- Wednesday, 20 April 2005, at 3:34 p.m.

Re: Saw Advice Needed
Bill -- Wednesday, 20 April 2005, at 4:06 p.m.

Re: Saw Advice Needed
Carl -- Wednesday, 20 April 2005, at 4:15 p.m.

Re: Saw Advice Needed
Capt. Dave Kosh -- Wednesday, 20 April 2005, at 4:18 p.m.

Re: Saw Advice Needed
CMP -- Wednesday, 20 April 2005, at 7:20 p.m.

Re: Saw Advice Needed
John D -- Wednesday, 20 April 2005, at 10:57 p.m.

Re: Saw Advice Needed
Paul Haggett -- Thursday, 21 April 2005, at 6:38 a.m.

Re: Saw Advice Needed
Capt. Dave Kosh -- Thursday, 21 April 2005, at 11:52 a.m.

Re: Saw Advice Needed
Rawleigh -- Thursday, 21 April 2005, at 12:06 p.m.